Audio Technica

Audio Technica AT33Sa, patefono galvutė

799.00 €

Audio Technica AT33Sa, patefono galvutė yra užsakytas ir bus išsiųstas, kai tik bus sandėlyje.

Siuntimas ir pristatymas

Prekes visoje Lietuvoje (išskyrus Kuršių Neriją) pristato skubių siuntų tarnyba "Venipak" per 1-2 darbo dienas, tiesiai į namus ar darbovietę. Pristatymas yra nemokamas, jeigu prekių suma viršija 100€, kitu atveju taikomas 4,99€ pristatymo mokestis. Kurjeris pieš atveždamas prekes su Jumis susisieks Jūsų nurodytu telefono numeriu ir suderins pristatymo laiką.

AT33Sa yra pirmoji "Audio-Technica" patefono galvutė su "Shibata" linijinio kontakto plunksna, garsėjanti puikiomis aukštų dažnių charakteristikomis ir stipriu vidutinių bei žemų dažnių skambesiu.

  • Dažninis atsakas 15 - 50 000 Hz
  • Kanalų atskyrimas 30 dB (1 kHz)
  • Vertikalaus sekimo kampas 23°
  • Vertikali sekimo jėga 1,8-2,2 g (standartinė 2,0 g)

The AT33Sa is the first Audio-Technica moving coil cartridge to feature a Shibata line-contact stylus, known for its superior high-range performance and strong mid and bass sound. The stylus is mounted on a tapered boron cantilever with a double damper for reduced weight and better audio quality. The cartridge’s dual moving coils provide excellent channel separation and are affixed within a strong but lightweight VC mold to greatly reduce unwanted vibration. The cartridge uses a neodymium magnet and a permendur yoke for dramatically enhanced magnetic energy. The PCOCC (Pure Copper by Ohno Continuous Casting) coils ensure pure audio transmission.

 

SPECIFIKACIJOS

Cartridge & Stylus
Frequency Response 15 - 50,000Hz
Channel Separation 30dB (1kHz)
Vertical Tracking Angle 23°
Vertical Tracking Force 1.8 to 2.2 g (standard 2.0 g)
Stylus Construction Nude square shank
Recommended Load Impedance Min 100Ω
Coil Impedance 10Ω (1kHz)
DC Resistance 10Ω
Coil Inductance 22 µm (1kHz)
Output Voltage 0.4mV (1kHz and 5cm/sec.)
Output Channel Balance 0.5dB (1kHz)
Stylus Shape Shibata
Cantilever Nude tapered boron
Static Compliance 40×10-6cm/dyne
Dynamic Compliance 10×10-6cm/dyne (100Hz)
Mounting 1/2” centers
Dimensions H16×W16.6×D26.5mm
Accessories Included 1 non magnetic screw driver; 1 brush; 2 washers; 2 Nuts; 2 x 19 mm mounting screws; 1 plastic protector; 1 set of PCOCC Lead Wires (AT6101)
Body Material Aluminium/Synthetic Resin
Stylus Curvature Radius Shibata
Type Dual Moving Coil
Weight 6.9g

 

Kategorijos

Audio Technica AT33Sa, patefono galvutė
Audio Technica

Audio Technica AT33Sa, patefono galvutė

799.00 €

AT33Sa yra pirmoji "Audio-Technica" patefono galvutė su "Shibata" linijinio kontakto plunksna, garsėjanti puikiomis aukštų dažnių charakteristikomis ir stipriu vidutinių bei žemų dažnių skambesiu.

APRAŠYMAS

The AT33Sa is the first Audio-Technica moving coil cartridge to feature a Shibata line-contact stylus, known for its superior high-range performance and strong mid and bass sound. The stylus is mounted on a tapered boron cantilever with a double damper for reduced weight and better audio quality. The cartridge’s dual moving coils provide excellent channel separation and are affixed within a strong but lightweight VC mold to greatly reduce unwanted vibration. The cartridge uses a neodymium magnet and a permendur yoke for dramatically enhanced magnetic energy. The PCOCC (Pure Copper by Ohno Continuous Casting) coils ensure pure audio transmission.

 

TECHNINIAI DUOMENYS

SPECIFIKACIJOS

Cartridge & Stylus
Frequency Response 15 - 50,000Hz
Channel Separation 30dB (1kHz)
Vertical Tracking Angle 23°
Vertical Tracking Force 1.8 to 2.2 g (standard 2.0 g)
Stylus Construction Nude square shank
Recommended Load Impedance Min 100Ω
Coil Impedance 10Ω (1kHz)
DC Resistance 10Ω
Coil Inductance 22 µm (1kHz)
Output Voltage 0.4mV (1kHz and 5cm/sec.)
Output Channel Balance 0.5dB (1kHz)
Stylus Shape Shibata
Cantilever Nude tapered boron
Static Compliance 40×10-6cm/dyne
Dynamic Compliance 10×10-6cm/dyne (100Hz)
Mounting 1/2” centers
Dimensions H16×W16.6×D26.5mm
Accessories Included 1 non magnetic screw driver; 1 brush; 2 washers; 2 Nuts; 2 x 19 mm mounting screws; 1 plastic protector; 1 set of PCOCC Lead Wires (AT6101)
Body Material Aluminium/Synthetic Resin
Stylus Curvature Radius Shibata
Type Dual Moving Coil
Weight 6.9g

 

Žiūrėti produktą

  • Gyvas pokalbis

    Ekspertų nuomonė ir patarimai

  • Pristatymas

    Lietuvoje per 1-2 d.d.

  • Darbo valandos

    Darbo dienomis 9.00 - 18.00

  • Atsiskaitymas

    Patogiausi būdai internetu
Atgal į viršų

AT33Sa yra pirmoji "Audio-Technica" patefono galvutė su "Shibata" linijinio kontakto plunksna, garsėjanti puikiomis aukštų dažnių charakteristikomis ir stipriu vidutinių bei žemų dažnių skambesiu.

  • Dažninis atsakas 15 - 50 000 Hz
  • Kanalų atskyrimas 30 dB (1 kHz)
  • Vertikalaus sekimo kampas 23°
  • Vertikali sekimo jėga 1,8-2,2 g (standartinė 2,0 g)

The AT33Sa is the first Audio-Technica moving coil cartridge to feature a Shibata line-contact stylus, known for its superior high-range performance and strong mid and bass sound. The stylus is mounted on a tapered boron cantilever with a double damper for reduced weight and better audio quality. The cartridge’s dual moving coils provide excellent channel separation and are affixed within a strong but lightweight VC mold to greatly reduce unwanted vibration. The cartridge uses a neodymium magnet and a permendur yoke for dramatically enhanced magnetic energy. The PCOCC (Pure Copper by Ohno Continuous Casting) coils ensure pure audio transmission.

 

SPECIFIKACIJOS

Cartridge & Stylus
Frequency Response 15 - 50,000Hz
Channel Separation 30dB (1kHz)
Vertical Tracking Angle 23°
Vertical Tracking Force 1.8 to 2.2 g (standard 2.0 g)
Stylus Construction Nude square shank
Recommended Load Impedance Min 100Ω
Coil Impedance 10Ω (1kHz)
DC Resistance 10Ω
Coil Inductance 22 µm (1kHz)
Output Voltage 0.4mV (1kHz and 5cm/sec.)
Output Channel Balance 0.5dB (1kHz)
Stylus Shape Shibata
Cantilever Nude tapered boron
Static Compliance 40×10-6cm/dyne
Dynamic Compliance 10×10-6cm/dyne (100Hz)
Mounting 1/2” centers
Dimensions H16×W16.6×D26.5mm
Accessories Included 1 non magnetic screw driver; 1 brush; 2 washers; 2 Nuts; 2 x 19 mm mounting screws; 1 plastic protector; 1 set of PCOCC Lead Wires (AT6101)
Body Material Aluminium/Synthetic Resin
Stylus Curvature Radius Shibata
Type Dual Moving Coil
Weight 6.9g