Dynaudio Sub 6, aktyvi DSP žemų dažnių garso kolonėlė (įvairių spalvų)

€2,625.00 EUR

Dynaudio Sub 6, aktyvi DSP žemų dažnių garso kolonėlė (įvairių spalvų) - Juoda Satino- Likerio - prieš pirkdami pasiteiraukite ar šią prekę turime sandėlyje, jei neturime ji gali būti užsakyta ir atvykti per 2-21 dieną.

▪️ Turite klausimų dėl šios prekės❓Galime pakonsultuoti telefonu +370 683 90000 arba atvykite į mūsų saloną Armatūrininkų g. 1, Kaunas.


Neišsirenkate garso kolonėlių?

Turime Jums sprendimą! Kviečiame atvykti ➡️garso aparatūros perklausai į mūsų saloną.

Pristatymas į namus nuo 4.99 €

Lietuvoje Venipak kurjeriu pristatymas per 1-2 darbo dienas.
Pristatymas už Lietuvos ribų per 4-10 darbo dienų.

Atsiimkite parduotuvėje už 0 €

Armatūrininkų g. 1, Kaunas
Darbo laikas: I-V 9:00-18:00

 

Sub 6 sukurtas sklandžiai "integruotis" su visais „Dynaudio“ garsiakalbiais.  Ši žemų dažnių garsiakalbis pasižymi ne tik puikiomis garso savybėmis, tačiau ir pelnytu "Metų Subvuferio" apdovanojimu!

  • Galia: 500 W.
  • 2 x 23cm MSP + hybrid drive vuferis.
  • Dažnių juosta: 16Hz – 230Hz.
  • Uždaro korpuso dizainas.


 

 

 

The Sub 6 is designed to integrate seamlessly with all Dynaudio speakers – and it has a special trick up its sleeve to do just that…

It features advanced intelligent DSP technology that tailors its performance so closely to a user’s system that it can confidently turn a two-way speaker system in a three-way one. For other models, including non-Dynaudio speakers, the crossover frequency, gain and phase can be set manually.

In charge of its powerful bass response are two brand-new 24cm MSP+ Hybrid Drive units, designed specifically for subwoofers, alongside a 500W power amplifier built into its base. These new drivers sit at either end of the carefully constructed sealed enclosure design, which stands wider than it does deep to help it sit more discreetly against a wall.

 

The Sub 6 has dual RCA and XLR connections to suit most systems and comes with a number of handy features to help larger and more advanced setups. This includes the ability to set a time-delay to ensure the sub and speakers are working perfectly in sync with one another. All a user has to do is enter the distance from the sub to the speakers and the sub will adjust itself automatically using both time and phase delays. There’s also a fully parametric EQ, including three filters to counter the effects of any room modes, to ensure the best possible performance.

Two-way to three-way
The Sub 6 integrates so well into existing Dynaudio setups because our engineers decided to go over and above the call of duty to assess the acoustic characteristics of each of our popular high-end hi-fi speakers – and then create a custom performance map for each one. This information is built into the Sub 6 so, using its display and menu system, users can choose the specific model of selected Dynaudio speakers they have in their setup. The Sub 6’s roll-off will then be matched perfectly between the two, turning a two-way system into a three-way one.

Firmware upgrades
When we release new speakers, we'll release a firmware update for the Sub 6, adding their new performance maps so the Sub 6 can work just as closely with our latest models as it does with the classics.

Brand-new drivers, tailor-made for subwoofers
Subwoofers need a different balance from their drivers than stereo speakers. That’s why the Sub 6 uses Dynaudio’s new MSP+ Hybrid Drive units, which are made primarily from aluminium for stiffness, and specifically with subwoofers in mind. To counter ringing from the aluminium, it utilises a dual-action damping system that combines paper dampening on the back of the driver and Dynaudio’s own Magnesium Silicate Polymer material in a dampening cap on the front, ensuring the best performance.

The Sub 6 comes in two finishes…

• Black satin lacquer
• White satin lacquer

And its presets are designed to work with these speakers…

• Confidence C1
• Confidence C2
• Confidence C4

• Confidence 20
• Confidence 30
• Confidence 50
• Confidence 60

• Contour S 1.4 LE
• Contour S 3.4 LE
• Contour 20
• Contour 30
• Contour 60

• Evidence Temptation
• Evidence Platinum
• Evidence Master

• Evoke 10
• Evoke 20
• Evoke 30
• Evoke 50

• Special Twenty-Five
• Special Forty

• Focus 20 XD
• Focus 30 XD
• Focus 60 XD

 

SPECIFIKACIJOS


 

System: Twin opposed driver, closed box, active DSP subwoofer
Analog inputs: 2 x balanced XLR, 2 x unbalanced RCA phono
Analog outputs: 2 x balanced XLR, 2 x unbalanced RCA phono
Frequency response (±3dB): 16Hz – 230Hz
Auto ON/OFF: Yes
Box Principle: Sealed
Low Pass Filter: Adjustable/preset
Phase Adjustment: 0/180 degrees

 

Woofer: 2 x 23cm MSP + hybrid drive
Amplifier power: 500W
AC power input: 100 - 120V/220 - 240V 50/60Hz
Standby power consumption: <0.5W
Maximum power consumption: 490W
Weight: 21.5kg / 45.2lb
Dimensions (W x H x D): 447 x 300 x 268mm
Dimensions with feet /grille (W x H x D): 470 x 333 x 268mm

 

Sub 6 sukurtas sklandžiai "integruotis" su visais „Dynaudio“ garsiakalbiais.  Ši žemų dažnių garsiakalbis pasižymi ne tik puikiomis garso savybėmis, tačiau ir pelnytu "Metų Subvuferio" apdovanojimu!

  • Galia: 500 W.
  • 2 x 23cm MSP + hybrid drive vuferis.
  • Dažnių juosta: 16Hz – 230Hz.
  • Uždaro korpuso dizainas.


 

 

 

The Sub 6 is designed to integrate seamlessly with all Dynaudio speakers – and it has a special trick up its sleeve to do just that…

It features advanced intelligent DSP technology that tailors its performance so closely to a user’s system that it can confidently turn a two-way speaker system in a three-way one. For other models, including non-Dynaudio speakers, the crossover frequency, gain and phase can be set manually.

In charge of its powerful bass response are two brand-new 24cm MSP+ Hybrid Drive units, designed specifically for subwoofers, alongside a 500W power amplifier built into its base. These new drivers sit at either end of the carefully constructed sealed enclosure design, which stands wider than it does deep to help it sit more discreetly against a wall.

 

The Sub 6 has dual RCA and XLR connections to suit most systems and comes with a number of handy features to help larger and more advanced setups. This includes the ability to set a time-delay to ensure the sub and speakers are working perfectly in sync with one another. All a user has to do is enter the distance from the sub to the speakers and the sub will adjust itself automatically using both time and phase delays. There’s also a fully parametric EQ, including three filters to counter the effects of any room modes, to ensure the best possible performance.

Two-way to three-way
The Sub 6 integrates so well into existing Dynaudio setups because our engineers decided to go over and above the call of duty to assess the acoustic characteristics of each of our popular high-end hi-fi speakers – and then create a custom performance map for each one. This information is built into the Sub 6 so, using its display and menu system, users can choose the specific model of selected Dynaudio speakers they have in their setup. The Sub 6’s roll-off will then be matched perfectly between the two, turning a two-way system into a three-way one.

Firmware upgrades
When we release new speakers, we'll release a firmware update for the Sub 6, adding their new performance maps so the Sub 6 can work just as closely with our latest models as it does with the classics.

Brand-new drivers, tailor-made for subwoofers
Subwoofers need a different balance from their drivers than stereo speakers. That’s why the Sub 6 uses Dynaudio’s new MSP+ Hybrid Drive units, which are made primarily from aluminium for stiffness, and specifically with subwoofers in mind. To counter ringing from the aluminium, it utilises a dual-action damping system that combines paper dampening on the back of the driver and Dynaudio’s own Magnesium Silicate Polymer material in a dampening cap on the front, ensuring the best performance.

The Sub 6 comes in two finishes…

• Black satin lacquer
• White satin lacquer

And its presets are designed to work with these speakers…

• Confidence C1
• Confidence C2
• Confidence C4

• Confidence 20
• Confidence 30
• Confidence 50
• Confidence 60

• Contour S 1.4 LE
• Contour S 3.4 LE
• Contour 20
• Contour 30
• Contour 60

• Evidence Temptation
• Evidence Platinum
• Evidence Master

• Evoke 10
• Evoke 20
• Evoke 30
• Evoke 50

• Special Twenty-Five
• Special Forty

• Focus 20 XD
• Focus 30 XD
• Focus 60 XD

 

SPECIFIKACIJOS


 

System: Twin opposed driver, closed box, active DSP subwoofer
Analog inputs: 2 x balanced XLR, 2 x unbalanced RCA phono
Analog outputs: 2 x balanced XLR, 2 x unbalanced RCA phono
Frequency response (±3dB): 16Hz – 230Hz
Auto ON/OFF: Yes
Box Principle: Sealed
Low Pass Filter: Adjustable/preset
Phase Adjustment: 0/180 degrees

 

Woofer: 2 x 23cm MSP + hybrid drive
Amplifier power: 500W
AC power input: 100 - 120V/220 - 240V 50/60Hz
Standby power consumption: <0.5W
Maximum power consumption: 490W
Weight: 21.5kg / 45.2lb
Dimensions (W x H x D): 447 x 300 x 268mm
Dimensions with feet /grille (W x H x D): 470 x 333 x 268mm