Audison APBX 8 DS, automobilinė žemų dažnių garso kolonėlė

€301.35 EUR

Audison APBX 8 DS, automobilinė žemų dažnių garso kolonėlė - prieš pirkdami pasiteiraukite ar šią prekę turime sandėlyje, jei neturime ji gali būti užsakyta ir atvykti per 2-21 dieną.

▪️ Turite klausimų dėl šios prekės❓Galime pakonsultuoti telefonu +370 683 90000 arba atvykite į mūsų saloną Armatūrininkų g. 1, Kaunas.


Nemokamas pristatymas Lietuvoje nuo 100 €

Lietuvoje Venipak kurjeriu pristatymas per 1-2 darbo dienas.
Pristatymas už Lietuvos ribų per 4-10 darbo dienų.

Atsiimkite prekes parduotuvėje už 0 €

Armatūrininkų g. 1, Kaunas
Darbo laikas: I-V 9:00-18:00

Automobilinė žemų dažnių garso kolonėlė, kuri perkels Jūsų žemų dažnių patirtį į kitą lygį. 

  • Rekomend. stiprintuvo galia: 500W.
  • SSP (Sub Smart Plug) terminalų blokas.
  • 2S² (2 pusės / 2 garsai) dizainas.

 

The APBX 8 DS loaded enclosure provides the highest performance/ size ratio. For this purpose an 8.5 lt. sealed enclosure with a 4+4 ohm dual voice-coil configuration was adopted to exploit the full power of an AP5.9 bit (paralleling voice coils for a 2 ohm load) or with two pairs of AP8.9 bit bridged channels (one bridged pair of channels to each voice coil). The speakers high excursion capability allows the use of the proprietary BASS BOOST of AP bit amplifiers to make use of all the available power for rich and dynamic bass.

  • Ultra-low profile (5.16 in. / 131 mm) box with sealed design perfectly
    tuned to fully exploit the APS 8 D driver.
  • 2S² (2 Sides/2 Sounds) design provides the ability to choose between
    Down-Firing mounting to increase the low-frequency extension and
    Up-Firing install to obtain more punch and definition.
  • Leveling feet with velcro inserts included for a secure grip with the
    carpet while maintaining easy removal.
  • SSP (Sub Smart Plug) features both traditional push contacts and a
    Plug-&-Play terminal block to easily configure the impedance as required
    and provides a quick release.
  • Rounded corners allow easy positioning in the trunk and act as
    reinforcement to reduce enclosure resonance.
  • Special designed cone-dustcap-basket geometry which guarantees a
    long linear excursion capability (9 mm, one-way).
  • Massive driver motor assembly, optimized with FEM (Finite Element
    Modeling) for perfect control under high excursion conditions.
  • Water-repellent pressed paper 8 in. cone, featuring a profile developed
    with FEM simulation and optimized with the Klippel Scan Vibrometer. Specifically developed to be combined with either AP1 D mono or AP4.9
    bit/AP4 D (2 CH bridged) amplifiers taking advantage of the bass boost
    feature and integrated parametric equalizer of the built-in DSP.
  • Sturdy metal grid included for a total protection of the subwoofer driver.

 

    SPECIFIKACIJOS

    TECHNICAL SPECS

    Size 200 mm
    Power Handling - Peak 500 W
    Power Handling - Continuous 250 W
    Magnet Material HIGH DENSITY FLUX FERRITE
    Cone Material WATER REPELLENT PRESSED PAPER

    DIMENSIONS

    Dimension A 374 mm
    Dimension B 334 mm
    Dimension C 109 mm


    INSTRUKCIJOS

    User Manual (EN).

    Automobilinė žemų dažnių garso kolonėlė, kuri perkels Jūsų žemų dažnių patirtį į kitą lygį. 

    • Rekomend. stiprintuvo galia: 500W.
    • SSP (Sub Smart Plug) terminalų blokas.
    • 2S² (2 pusės / 2 garsai) dizainas.

     

    The APBX 8 DS loaded enclosure provides the highest performance/ size ratio. For this purpose an 8.5 lt. sealed enclosure with a 4+4 ohm dual voice-coil configuration was adopted to exploit the full power of an AP5.9 bit (paralleling voice coils for a 2 ohm load) or with two pairs of AP8.9 bit bridged channels (one bridged pair of channels to each voice coil). The speakers high excursion capability allows the use of the proprietary BASS BOOST of AP bit amplifiers to make use of all the available power for rich and dynamic bass.

    • Ultra-low profile (5.16 in. / 131 mm) box with sealed design perfectly
      tuned to fully exploit the APS 8 D driver.
    • 2S² (2 Sides/2 Sounds) design provides the ability to choose between
      Down-Firing mounting to increase the low-frequency extension and
      Up-Firing install to obtain more punch and definition.
    • Leveling feet with velcro inserts included for a secure grip with the
      carpet while maintaining easy removal.
    • SSP (Sub Smart Plug) features both traditional push contacts and a
      Plug-&-Play terminal block to easily configure the impedance as required
      and provides a quick release.
    • Rounded corners allow easy positioning in the trunk and act as
      reinforcement to reduce enclosure resonance.
    • Special designed cone-dustcap-basket geometry which guarantees a
      long linear excursion capability (9 mm, one-way).
    • Massive driver motor assembly, optimized with FEM (Finite Element
      Modeling) for perfect control under high excursion conditions.
    • Water-repellent pressed paper 8 in. cone, featuring a profile developed
      with FEM simulation and optimized with the Klippel Scan Vibrometer. Specifically developed to be combined with either AP1 D mono or AP4.9
      bit/AP4 D (2 CH bridged) amplifiers taking advantage of the bass boost
      feature and integrated parametric equalizer of the built-in DSP.
    • Sturdy metal grid included for a total protection of the subwoofer driver.

     

      SPECIFIKACIJOS

      TECHNICAL SPECS

      Size 200 mm
      Power Handling - Peak 500 W
      Power Handling - Continuous 250 W
      Magnet Material HIGH DENSITY FLUX FERRITE
      Cone Material WATER REPELLENT PRESSED PAPER

      DIMENSIONS

      Dimension A 374 mm
      Dimension B 334 mm
      Dimension C 109 mm


      INSTRUKCIJOS

      User Manual (EN).