🎵Garso kolonėlės | 💎Žymūs gamintojai | 🔥Geros kainos | 🚚Pristatymas per 1-2 d.d. | ❄️Pasiruoškite sezonui jau dabar!
1 2
Audio-Technica

Audio-Technica AT-VMN95E, cartridge

€59.00 EUR

Audio-Technica AT-VMN95E, cartridge is backordered and will ship as soon as it is back in stock.

▪️ Turite klausimų dėl šios prekės❓Galime pakonsultuoti telefonu +370 683 90000, arba mūsų salone Armatūrininkų g. 1, Kaunas.
📩 Taip pat galite siųsti mums užklausą į kurią atsakysime per 24 val.

Home delivery from €4.99

Venipak courier within 1-2 working days.

Collect in store €0

Armaturininkai str. 1, Kaunas
Working hours: IV 9:00-18:00

VM95 series cartridge with 0.3 x 0.7 mm elliptical Stylus.

  • Aluminum cantilever.
  • Frequency band: 20-22,000 Hz.
  • Channel separation: 20 (dB at 1 kHz).
  • Stable body without sharp corners.

This VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge's special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.

PROPERTIES

  • VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus
  • Aluminum cantilever
  • Especially wound coils increase output voltage
  • Durable low-resonance polymer housing
  • Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required
  • Compatible with any AT-VMN95 replacement stylus

SPECIFICATIONS


Cartridge & Stylus
Frequency Response 20-22,000 Hz
Channel Separation 20 (dB at 1 kHz)
Vertical Tracking Angle 23°
Vertical Tracking Force 1.8-2.2 g (2.0 g standard)
Stylus Construction Bonded round shank
Recommended Load Impedance 47,000 ohms
Coil Impedance 3.3k ohms (1kHz)
DC Resistance 485 ohms
Coil Inductance 550 mH (1 kHz)
Output Voltage 4.0 mV (1 kHz, 5 cm/sec.)
Output Channel Balance 2.0dB (1kHz)
Stylus Shape 0.3 x 0.7 mil elliptical
Cantilever Aluminum pipe
Static Compliance 17 x 10 - 6 cm / dyne
Dynamic Compliance 7 x 10 - 6 cm / dyne (100 Hz)
Mounting Half-inch
Cartridge Weight 6.1g
Dimensions 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D
Accessories Included Two 11 mm installation screws, two 8 mm installation screws, two washers
Model AT-VM95E
Mounting Feature Half-inch mount
Recommended Load Capacitance 100 to 200 pF
Replacement Stylus AT-VMN95E
Stylus Size 0.3 x 0.7 mil
Type VM Stereo Dual Magnet
Weight 6.1 g (0.22 oz)
Wire Used for Coil TP Copper


Back to top

VM95 series cartridge with 0.3 x 0.7 mm elliptical Stylus.

  • Aluminum cantilever.
  • Frequency band: 20-22,000 Hz.
  • Channel separation: 20 (dB at 1 kHz).
  • Stable body without sharp corners.

This VM95 Series cartridge with 0.3 x 0.7 mil elliptical stylus fits half-inch mount turntables. The cartridge's special coil design delivers a powerful output level of 4.0 mV. It also offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.

PROPERTIES

  • VM95 Series dual magnet cartridge with 0.3 x 0.7 mil elliptical stylus
  • Aluminum cantilever
  • Especially wound coils increase output voltage
  • Durable low-resonance polymer housing
  • Threaded inserts in cartridge body enable cartridge to be mounted to headshell with just two screws – no nuts required
  • Compatible with any AT-VMN95 replacement stylus

SPECIFICATIONS


Cartridge & Stylus
Frequency Response 20-22,000 Hz
Channel Separation 20 (dB at 1 kHz)
Vertical Tracking Angle 23°
Vertical Tracking Force 1.8-2.2 g (2.0 g standard)
Stylus Construction Bonded round shank
Recommended Load Impedance 47,000 ohms
Coil Impedance 3.3k ohms (1kHz)
DC Resistance 485 ohms
Coil Inductance 550 mH (1 kHz)
Output Voltage 4.0 mV (1 kHz, 5 cm/sec.)
Output Channel Balance 2.0dB (1kHz)
Stylus Shape 0.3 x 0.7 mil elliptical
Cantilever Aluminum pipe
Static Compliance 17 x 10 - 6 cm / dyne
Dynamic Compliance 7 x 10 - 6 cm / dyne (100 Hz)
Mounting Half-inch
Cartridge Weight 6.1g
Dimensions 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D
Accessories Included Two 11 mm installation screws, two 8 mm installation screws, two washers
Model AT-VM95E
Mounting Feature Half-inch mount
Recommended Load Capacitance 100 to 200 pF
Replacement Stylus AT-VMN95E
Stylus Size 0.3 x 0.7 mil
Type VM Stereo Dual Magnet
Weight 6.1 g (0.22 oz)
Wire Used for Coil TP Copper