DALI RUBICON 8, grindinė garso kolonėlė (įvairių spalvų) - Black High Gloss Laquer - prieš pirkdami pasiteiraukite ar šią prekę turime sandėlyje, jei neturime ji gali būti užsakyta ir atvykti per 2-21 dieną.
▪️ Turite klausimų dėl šios prekės❓Galime pakonsultuoti telefonu +370 683 90000 arba atvykite į mūsų saloną Armatūrininkų g. 1, Kaunas.
Turime Jums sprendimą! Kviečiame atvykti ➡️garso aparatūros perklausai į mūsų saloną.
Lietuvoje Venipak kurjeriu pristatymas per 1-2 darbo dienas.
Pristatymas už Lietuvos ribų per 4-10 darbo dienų.
Armatūrininkų g. 1, Kaunas
Darbo laikas: I-V 9:00-18:00
Stilinga RUBICON serijos grindinė garso kolonėlė. Puikus skambesys garantuotas! Geriausią efektą su šia kolonėle pasieksite naudodami ją, kaip RUBICON erdvinės garso sistemos dalį.
The floor standing flagship of the RUBICON series, the RUBICON 8, will provide you with a mind blowing large soundstage and an impressive deep, physical bass. The RUBICON 8 has no less than three drivers that all kick in at different frequencies. This setup ads up to what in effect is a 2½+½+½-way construction, and generates an amazing range and impressive sound pressure. The RUBICON 8 is for those seeking the extraordinary in size and sound.
With a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.
The hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.
Dividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.
Using a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly.
| Product series | RUBICON |
|---|---|
| Frequency Range (+/-3 dB) [Hz] | 38 - 34.000 |
| Sensitivity (2,83 V/1 m) [dB] | 90.5 |
| Nominal Impedance [ohms] | 4 |
| Maximum SPL [dB] | 112 |
| Recommended Amplifier Power [W] | 40 - 250 |
| Crossover Frequency [Hz] | 500 / 800 / 2.500 / 14.000 |
| Crossover Principle | 2½ + ½ + ½ way |
| Hybrid tweeter module, Super high freq. driver, Quantity | 1 x 17 x 45 mm |
| Hybrid tweeter module, Super high freq. driver, Diaphragm type | Ribbon |
| Hybrid tweeter module, High frequency driver, Quantity | 1 x 29 mm |
| Hybrid tweeter module, High frequency driver Diaphragm type | Soft Textile Dome |
| Low frequency driver, Quantity | 3 x 6½" |
| Low frequency driver, Diaphragm type | Wood Fibre Cone |
| Enclosure type | Bass Reflex |
| Bass Reflex Tuning Frequency [Hz] | 33.5 |
| Connection Input | Bi-Wiring |
| Magnetic Shielding | No |
| Recommended Placement | Floor |
| Recommended Distance From Wall [cm] | 20 - 180 |
| Dimensions With Base (HxWxD) [mm] | 1,100 x 220 x 445 |
| Accessories Included | Manual Micro Fibre Cloth Rubber Bumpers Spikes M8 |
| Weight [kg] | 27.3 |
Stilinga RUBICON serijos grindinė garso kolonėlė. Puikus skambesys garantuotas! Geriausią efektą su šia kolonėle pasieksite naudodami ją, kaip RUBICON erdvinės garso sistemos dalį.
The floor standing flagship of the RUBICON series, the RUBICON 8, will provide you with a mind blowing large soundstage and an impressive deep, physical bass. The RUBICON 8 has no less than three drivers that all kick in at different frequencies. This setup ads up to what in effect is a 2½+½+½-way construction, and generates an amazing range and impressive sound pressure. The RUBICON 8 is for those seeking the extraordinary in size and sound.
With a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.
The hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.
Dividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.
Using a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly.
| Product series | RUBICON |
|---|---|
| Frequency Range (+/-3 dB) [Hz] | 38 - 34.000 |
| Sensitivity (2,83 V/1 m) [dB] | 90.5 |
| Nominal Impedance [ohms] | 4 |
| Maximum SPL [dB] | 112 |
| Recommended Amplifier Power [W] | 40 - 250 |
| Crossover Frequency [Hz] | 500 / 800 / 2.500 / 14.000 |
| Crossover Principle | 2½ + ½ + ½ way |
| Hybrid tweeter module, Super high freq. driver, Quantity | 1 x 17 x 45 mm |
| Hybrid tweeter module, Super high freq. driver, Diaphragm type | Ribbon |
| Hybrid tweeter module, High frequency driver, Quantity | 1 x 29 mm |
| Hybrid tweeter module, High frequency driver Diaphragm type | Soft Textile Dome |
| Low frequency driver, Quantity | 3 x 6½" |
| Low frequency driver, Diaphragm type | Wood Fibre Cone |
| Enclosure type | Bass Reflex |
| Bass Reflex Tuning Frequency [Hz] | 33.5 |
| Connection Input | Bi-Wiring |
| Magnetic Shielding | No |
| Recommended Placement | Floor |
| Recommended Distance From Wall [cm] | 20 - 180 |
| Dimensions With Base (HxWxD) [mm] | 1,100 x 220 x 445 |
| Accessories Included | Manual Micro Fibre Cloth Rubber Bumpers Spikes M8 |
| Weight [kg] | 27.3 |
Spalva
Stilinga RUBICON serijos grindinė garso kolonėlė. Puikus skambesys garantuotas! Geriausią efektą su šia kolonėle pasieksite naudodami ją, kaip RUBICON erdvinės garso sistemos dalį.
The floor standing flagship of the RUBICON series, the RUBICON 8, will provide you with a mind blowing large soundstage and an impressive deep, physical bass. The RUBICON 8 has no less than three drivers that all kick in at different frequencies. This setup ads up to what in effect is a 2½+½+½-way construction, and generates an amazing range and impressive sound pressure. The RUBICON 8 is for those seeking the extraordinary in size and sound.
With a pole piece constructed entirely from SMC, surrounded by a slitted copper cap, and enclosed within a large ferrite magnet, the effect of the SMC is focused and maximised, and reduces distortion as never heard before.
The hybrid tweeter module is a DALI trademark and for the RUBICON series, it is build in Denmark. The hybrid tweeter module, combines the dome tweeter with the ribbon tweeter for an amazing rendering of the high frequencies.
Dividing the mid-range and basse drivers into separated chambers enables us to individually tune every driver to its specific frequency range to maximise the woofer output.
Using a wood fibre cone gives the in-house build woofer a light, rigid and randomly uneven membrane. Making it easy to move ensures even piston like movements and reduces the possibility of surface resonance greatly.
| Product series | RUBICON |
|---|---|
| Frequency Range (+/-3 dB) [Hz] | 38 - 34.000 |
| Sensitivity (2,83 V/1 m) [dB] | 90.5 |
| Nominal Impedance [ohms] | 4 |
| Maximum SPL [dB] | 112 |
| Recommended Amplifier Power [W] | 40 - 250 |
| Crossover Frequency [Hz] | 500 / 800 / 2.500 / 14.000 |
| Crossover Principle | 2½ + ½ + ½ way |
| Hybrid tweeter module, Super high freq. driver, Quantity | 1 x 17 x 45 mm |
| Hybrid tweeter module, Super high freq. driver, Diaphragm type | Ribbon |
| Hybrid tweeter module, High frequency driver, Quantity | 1 x 29 mm |
| Hybrid tweeter module, High frequency driver Diaphragm type | Soft Textile Dome |
| Low frequency driver, Quantity | 3 x 6½" |
| Low frequency driver, Diaphragm type | Wood Fibre Cone |
| Enclosure type | Bass Reflex |
| Bass Reflex Tuning Frequency [Hz] | 33.5 |
| Connection Input | Bi-Wiring |
| Magnetic Shielding | No |
| Recommended Placement | Floor |
| Recommended Distance From Wall [cm] | 20 - 180 |
| Dimensions With Base (HxWxD) [mm] | 1,100 x 220 x 445 |
| Accessories Included | Manual Micro Fibre Cloth Rubber Bumpers Spikes M8 |
| Weight [kg] | 27.3 |
