1 2
Grado

Grado Opus3 kartridžas

€366.45 EUR

Grado Opus3 kartridžas - prieš pirkdami pasiteiraukite ar šią prekę turime sandėlyje, jei neturime ji gali būti užsakyta ir atvykti per 2-21 dieną.

▪️ Turite klausimų dėl šios prekės❓Galime pakonsultuoti telefonu +370 683 90000 arba atvykite į mūsų saloną Armatūrininkų g. 1, Kaunas.

Nemokamas pristatymas Lietuvoje nuo 100 €

Lietuvoje Venipak kurjeriu pristatymas per 1-2 darbo dienas.
Pristatymas už Lietuvos ribų per 4-10 darbo dienų.

Atsiimkite prekes parduotuvėje už 0 €

Armatūrininkų g. 1, Kaunas
Darbo laikas: I-V 9:00-18:00

Timbre serijos, prabanga, išskirtine surinkimo kokybe (surinkta rankomis) pasižymintis kartridžas iš Grado. Tai tikras meno kūrinys vertas tikro entuziasto!

  • Kartridže naudojamos tik prabangiausios medžiagos.
  • Klevo medienos korpusas.
  • Dažnių juosta: 10-60 kHz.
  • Kontileveris: Aliuminis/ Eliptinis deimantas.

 

A Grand Entrance

 Bringing extreme levels of clarity over the full frequency range, the Opus3 bridges together entry-level and mid-range. The Opus3 is the easiest way to enter the family of our wooden cartridges. Image

Oh, what could be.

Bridging the Gap

 The Opus3 was built specifically to bring the entry-level and the mid-range phono cartridges closer together, creating an even tighter ecosystem of cartridges. We worked on the Opus3 knowing we wanted to have a cost-effective wooden cartridge while at the same time taking advantage of the techniques and processes used in the higher-end models.If taking a step up in your turntable setup is on your to-do list, start here.

An Achievement.

First of its Kind

 When it comes to the Opus3, there are a few “firsts”. This is the first cartridge built with a maple wood housing, as well as the first to use what we learned with our high-end cartridges at such an entry-level price. The housing is a new shape but still keeps the wood working in tandem with the cartridge inside. This is also the first cartridge built specifically with the Timbre Series in mind.

In the Details.

Extreme Precision

 Grado has combined newly developed coil winding techniques with decades-old disciplines. A new two-step shielding process brings not only exact unison between the four coils but an unobstructed path for a cleaner signal. The music is allowed to travel undistorted through the coils, greatly reducing mechanical noise. There is an extreme clarity over the full frequency range, with absolutely no stridency or shrillness. Precisely hand tipped with a diamond, a great amount of care go into each cartridge we build.

The Sound of Wood.

Built from Maple

 The Opus3 is nestled inside a maple housing, something a cartridge has never done before. After years of working with maple from our Heritage and Statement Series headphones, we knew it was time to bring it to a turntable. Maple produces a vibrant and luscious sound, while staying consistent and clear. Through a variation of thermal aging processes, the housing gains the ability to better dampen and control the resonant frequencies.

With Love

Hand-Built in Brooklyn

 Each Opus3 is hand-built by our team in Brooklyn. Fine tuned for everything from entry-level turntables up to the highest-end stereo systems, the solid mass of the wood helps keep the Opus3 steady and producing the Grado signature sound. We started building cartridges on a kitchen table in 1953, and every experience since then has led to the creation of the Opus3. Image Image Image

 

SPECIFIKACIJOS

  • Body: Maple Wood
  • Cantilever: Aluminum / Elliptical Diamond
  • Output:
  • High 4.0mV @5 CMV (45)
  • Low  1.0mV @5 CMV (45) 
  • Inductance:
  • High Output 55mH
  • Low Output  6mH
  • Resistance:
  • High Output  660 ohms
  • Low Output   70 ohms
  • Input Load: 10k-47k ohms
  • Cartridge Weight: 8 grams
  • Tracking Force: 1.6-1.9 grams
  • Compliance: 20μm/mN
  • Channel Seperation: Average 30db - 10-30k Hz
  • Controlled Frequency Response: 10-60 kHz
  • Non-Sensative to Capacitive Load
  • Builds: High Output, Low Output, Mono


  • Gyvas pokalbis

    Ekspertų nuomonė ir patarimai

  • Delivery

    In Lithuania within 1-2 working days

  • Darbo valandos

    Darbo dienomis 9.00 - 18.00

  • Atsiskaitymas

    Patogiausi būdai internetu
Atgal į viršų

Timbre serijos, prabanga, išskirtine surinkimo kokybe (surinkta rankomis) pasižymintis kartridžas iš Grado. Tai tikras meno kūrinys vertas tikro entuziasto!

  • Kartridže naudojamos tik prabangiausios medžiagos.
  • Klevo medienos korpusas.
  • Dažnių juosta: 10-60 kHz.
  • Kontileveris: Aliuminis/ Eliptinis deimantas.

 

A Grand Entrance

 Bringing extreme levels of clarity over the full frequency range, the Opus3 bridges together entry-level and mid-range. The Opus3 is the easiest way to enter the family of our wooden cartridges. Image

Oh, what could be.

Bridging the Gap

 The Opus3 was built specifically to bring the entry-level and the mid-range phono cartridges closer together, creating an even tighter ecosystem of cartridges. We worked on the Opus3 knowing we wanted to have a cost-effective wooden cartridge while at the same time taking advantage of the techniques and processes used in the higher-end models.If taking a step up in your turntable setup is on your to-do list, start here.

An Achievement.

First of its Kind

 When it comes to the Opus3, there are a few “firsts”. This is the first cartridge built with a maple wood housing, as well as the first to use what we learned with our high-end cartridges at such an entry-level price. The housing is a new shape but still keeps the wood working in tandem with the cartridge inside. This is also the first cartridge built specifically with the Timbre Series in mind.

In the Details.

Extreme Precision

 Grado has combined newly developed coil winding techniques with decades-old disciplines. A new two-step shielding process brings not only exact unison between the four coils but an unobstructed path for a cleaner signal. The music is allowed to travel undistorted through the coils, greatly reducing mechanical noise. There is an extreme clarity over the full frequency range, with absolutely no stridency or shrillness. Precisely hand tipped with a diamond, a great amount of care go into each cartridge we build.

The Sound of Wood.

Built from Maple

 The Opus3 is nestled inside a maple housing, something a cartridge has never done before. After years of working with maple from our Heritage and Statement Series headphones, we knew it was time to bring it to a turntable. Maple produces a vibrant and luscious sound, while staying consistent and clear. Through a variation of thermal aging processes, the housing gains the ability to better dampen and control the resonant frequencies.

With Love

Hand-Built in Brooklyn

 Each Opus3 is hand-built by our team in Brooklyn. Fine tuned for everything from entry-level turntables up to the highest-end stereo systems, the solid mass of the wood helps keep the Opus3 steady and producing the Grado signature sound. We started building cartridges on a kitchen table in 1953, and every experience since then has led to the creation of the Opus3. Image Image Image

 

SPECIFIKACIJOS

  • Body: Maple Wood
  • Cantilever: Aluminum / Elliptical Diamond
  • Output:
  • High 4.0mV @5 CMV (45)
  • Low  1.0mV @5 CMV (45) 
  • Inductance:
  • High Output 55mH
  • Low Output  6mH
  • Resistance:
  • High Output  660 ohms
  • Low Output   70 ohms
  • Input Load: 10k-47k ohms
  • Cartridge Weight: 8 grams
  • Tracking Force: 1.6-1.9 grams
  • Compliance: 20μm/mN
  • Channel Seperation: Average 30db - 10-30k Hz
  • Controlled Frequency Response: 10-60 kHz
  • Non-Sensative to Capacitive Load
  • Builds: High Output, Low Output, Mono