NEBEGAMINAMA

Audio-Technica AT-LP3, patefonas (įvairių spalvų)

€239.00 EUR 299.00 €

▪️ Turite klausimų dėl šios prekės❓Galime pakonsultuoti telefonu +370 683 90000, arba mūsų salone Armatūrininkų g. 1, Kaunas.
📩 Taip pat galite siųsti mums užklausą į kurią atsakysime per 24 val.


Nemokamas pristatymas Lietuvoje nuo 100 €

Lietuvoje Venipak kurjeriu pristatymas per 1-2 darbo dienas.
Pristatymas už Lietuvos ribų per 4-10 darbo dienų.

Atsiimkite prekes parduotuvėje už 0 €

Armatūrininkų g. 1, Kaunas
Darbo laikas: I-V 9:00-18:00

Aukštos kokybės stilingas patefonas iš Audio-Technica. Puikus vinilinių įrašų atkūrimas garantuotas!

  • Patefono tipas: Automatinis.
  • Diržinė pavara.
  • Galimi greičio pasirinkimai: 33 1/3, 45 Aps/Min.
  • AT91R VM stereo kartridžas komplekte.

 

The AT-LP3 fully automatic belt-drive turntable lets you take your analog listening experience to the next level with advanced features not typically found on automatic turntables. The balanced straight tone arm comes with a 1/2" mount universal headshell and AT91R Dual Moving Magnet phono cartridge, giving you excellent high-fidelity performance, plus the option to use other moving magnet or moving coil cartridges of your choosing. A hydraulically damped lift control allows the stylus to be precisely and safely lowered and raised at any point on a record. Yet the turntable also offers fully automatic operation, so you can simply press the Start button to begin play and the Stop button to lift and return the tone arm and shut off the turntable (the stop function occurs automatically when a record has played all the way through). The AT-LP3 is constructed of anti-vibration damping materials that limits low-frequency feedback. Resonance is further reduced by the turntable’s die-cast aluminum platter and accompanying 4 mm rubber damping mat. Equipped to play both 33-1/3 and 45 RPM records, the AT-LP3 features a built-in switchable phono preamp and an attached dual RCA output cable that enable it be connected to a home stereo, powered speakers and other components whether they have a dedicated turntable input or not. Available in black (AT-LP3BK) and white (AT-LP3WH).


    SPECIFIKACIJOS

    Turntable
    Type Fully Automatic, Belt-Drive
    Motor DC motor
    Speeds 33-1/3 RPM, 45 RPM
    Turntable Platter Die-cast aluminium
    Wow and Flutter Less than 0.2% WRMS (33 1/3 RPM) at3kHz
    Signal-to-Noise Ratio > 60 dB
    Output Level “PHONO” (MM) 3.5mV nominal at 1kHz, 5cm/sec 
    “LINE” (MC) 220mV nominal at 1kHz, 5cm/sec
    Phono Pre-Amp Gain 36dB nominal, RIAA equalised
    56dB nominal, RIAA equalised
    Power Supply Requirements 220 to 240 V / 50, 60 Hz
    Power Consumption 2W
    Dimensions 435 mm ×353 mm×128 mm (W×D×H)
    Weight 5.2kg
    Accessories Included Rubber mat, Dust cover, Platter (with drive belt), Counterweight, AT-HS3 Headshell with AT91R VM stereo cartridge, 45 RPM adapter, Power cable
    Cartridge & Stylus
    Model AT91R
    Type VM Dual Magnet
    Output Voltage 3.5mV (mV at 1kHz, 5 cm/sec)
    Vertical Tracking Force Range 1.5 to 2.5g (standard 2.0g)
    Stylus Construction 0.6 mil bonded conical
    Cantilever Aluminium pipe
    Recommended Load Impedance 47,000 ohms
    Weight 5.0g
    Headshell
    Model AT-HS3
    Weight 11.1g
    Overhang Adjustment 8mm
    Tone arm
    Type Static balanced straight shaped with soft damping control
    Effective Length 221.5mm
    Overhang 19mm
    Maximum Tracking Error Angle Less than 3°
    Stylus Pressure Adjustment Range 1 to 4g
    Applicable Cartridge Weight 14.5 to 20g
    Anti-skating Range 0 - 3 g


    INSTRUKCIJOS

    User Manual (EN). 

    Aukštos kokybės stilingas patefonas iš Audio-Technica. Puikus vinilinių įrašų atkūrimas garantuotas!

    • Patefono tipas: Automatinis.
    • Diržinė pavara.
    • Galimi greičio pasirinkimai: 33 1/3, 45 Aps/Min.
    • AT91R VM stereo kartridžas komplekte.

     

    The AT-LP3 fully automatic belt-drive turntable lets you take your analog listening experience to the next level with advanced features not typically found on automatic turntables. The balanced straight tone arm comes with a 1/2" mount universal headshell and AT91R Dual Moving Magnet phono cartridge, giving you excellent high-fidelity performance, plus the option to use other moving magnet or moving coil cartridges of your choosing. A hydraulically damped lift control allows the stylus to be precisely and safely lowered and raised at any point on a record. Yet the turntable also offers fully automatic operation, so you can simply press the Start button to begin play and the Stop button to lift and return the tone arm and shut off the turntable (the stop function occurs automatically when a record has played all the way through). The AT-LP3 is constructed of anti-vibration damping materials that limits low-frequency feedback. Resonance is further reduced by the turntable’s die-cast aluminum platter and accompanying 4 mm rubber damping mat. Equipped to play both 33-1/3 and 45 RPM records, the AT-LP3 features a built-in switchable phono preamp and an attached dual RCA output cable that enable it be connected to a home stereo, powered speakers and other components whether they have a dedicated turntable input or not. Available in black (AT-LP3BK) and white (AT-LP3WH).


      SPECIFIKACIJOS

      Turntable
      Type Fully Automatic, Belt-Drive
      Motor DC motor
      Speeds 33-1/3 RPM, 45 RPM
      Turntable Platter Die-cast aluminium
      Wow and Flutter Less than 0.2% WRMS (33 1/3 RPM) at3kHz
      Signal-to-Noise Ratio > 60 dB
      Output Level “PHONO” (MM) 3.5mV nominal at 1kHz, 5cm/sec 
      “LINE” (MC) 220mV nominal at 1kHz, 5cm/sec
      Phono Pre-Amp Gain 36dB nominal, RIAA equalised
      56dB nominal, RIAA equalised
      Power Supply Requirements 220 to 240 V / 50, 60 Hz
      Power Consumption 2W
      Dimensions 435 mm ×353 mm×128 mm (W×D×H)
      Weight 5.2kg
      Accessories Included Rubber mat, Dust cover, Platter (with drive belt), Counterweight, AT-HS3 Headshell with AT91R VM stereo cartridge, 45 RPM adapter, Power cable
      Cartridge & Stylus
      Model AT91R
      Type VM Dual Magnet
      Output Voltage 3.5mV (mV at 1kHz, 5 cm/sec)
      Vertical Tracking Force Range 1.5 to 2.5g (standard 2.0g)
      Stylus Construction 0.6 mil bonded conical
      Cantilever Aluminium pipe
      Recommended Load Impedance 47,000 ohms
      Weight 5.0g
      Headshell
      Model AT-HS3
      Weight 11.1g
      Overhang Adjustment 8mm
      Tone arm
      Type Static balanced straight shaped with soft damping control
      Effective Length 221.5mm
      Overhang 19mm
      Maximum Tracking Error Angle Less than 3°
      Stylus Pressure Adjustment Range 1 to 4g
      Applicable Cartridge Weight 14.5 to 20g
      Anti-skating Range 0 - 3 g


      INSTRUKCIJOS

      User Manual (EN).