🎵Garso kolonėlės | 💎Žymūs gamintojai | 🔥Geros kainos | 🚚Pristatymas per 1-2 d.d. | ❄️Pasiruoškite sezonui jau dabar!
Neoline  |  Brūkšninis kodas: 6909751331002

Neoline saugiklio kabelis skirtas G-TECH X76 vaizdo registratoriui

€19.00 EUR

▪️ Turite klausimų dėl šios prekės❓Galime pakonsultuoti telefonu +370 683 90000, arba mūsų salone Armatūrininkų g. 1, Kaunas.
📩 Taip pat galite siųsti mums užklausą į kurią atsakysime per 24 val.

Nemokamas pristatymas Lietuvoje nuo 100 €

Lietuvoje Venipak kurjeriu pristatymas per 1-2 darbo dienas.
Pristatymas už Lietuvos ribų per 4-10 darbo dienų.

Atsiimkite prekes parduotuvėje už 0 €

Armatūrininkų g. 1, Kaunas
Darbo laikas: I-V 9:00-18:00

Saugiklio laidas skirtas Neoline G-TECH X76  vaizdo registratoriui. Laidas naudojamas sujungti DVR tiesiai į automobilio srovės tinklą.

  • Kabelio iligis: 3 m.
  • Išėjimo srovė: 5V / 1.5A.
  • Savaiminis išsijungimas krenant srovei tinkle (≤ 11.3V).

 

NEOLINE FUSE CORD For G-TECH X76 is designed to connect the DVR directly to the vehicle’s on-board network. When the device is connected with the FUSE CORD, “Parking” mode is able to work. “Parking” mode – when the engine is off, the GPS and the radar module will be disabled, while the DVR continues to work and is connected to the vehicle’s electrical network. After the set time, the hybrid will enter Parking mode. When the G-sensor is triggered, video will be recorded to the “Parking” folder. In order to enter the “Parking” mode for X Series, hold the hot key button for a few seconds. Only G-TECH X76 will go into “Parking” mode automatically.  When the engine is started, the hybrid will switch to the standard mode automatically.

Does not occupy the cigarette lighter’s socket.
Has a built-in fuse.
Length 3m.

 

SPECIFIKACIJOS

  • Cable length: 3m
  • Output voltage: 5V / 1.5A
  • Shutdown in case of voltage drop on-board network: ≤ 11.3V
Atgal į viršų

Saugiklio laidas skirtas Neoline G-TECH X76  vaizdo registratoriui. Laidas naudojamas sujungti DVR tiesiai į automobilio srovės tinklą.

  • Kabelio iligis: 3 m.
  • Išėjimo srovė: 5V / 1.5A.
  • Savaiminis išsijungimas krenant srovei tinkle (≤ 11.3V).

 

NEOLINE FUSE CORD For G-TECH X76 is designed to connect the DVR directly to the vehicle’s on-board network. When the device is connected with the FUSE CORD, “Parking” mode is able to work. “Parking” mode – when the engine is off, the GPS and the radar module will be disabled, while the DVR continues to work and is connected to the vehicle’s electrical network. After the set time, the hybrid will enter Parking mode. When the G-sensor is triggered, video will be recorded to the “Parking” folder. In order to enter the “Parking” mode for X Series, hold the hot key button for a few seconds. Only G-TECH X76 will go into “Parking” mode automatically.  When the engine is started, the hybrid will switch to the standard mode automatically.

Does not occupy the cigarette lighter’s socket.
Has a built-in fuse.
Length 3m.

 

SPECIFIKACIJOS

  • Cable length: 3m
  • Output voltage: 5V / 1.5A
  • Shutdown in case of voltage drop on-board network: ≤ 11.3V