🎵Garso kolonėlės | 💎Žymūs gamintojai | 🔥Geros kainos | 🚚Pristatymas per 1-2 d.d. | ❄️Pasiruoškite sezonui jau dabar!
Rega

Rega RB3000, tonearmas

€1,599.00 EUR

Rega RB3000, tonearmas - prieš pirkdami pasiteiraukite ar šią prekę turime sandėlyje, jei neturime ji gali būti užsakyta ir atvykti per 2-21 dieną.

▪️ Turite klausimų dėl šios prekės❓Galime pakonsultuoti telefonu +370 683 90000, arba mūsų salone Armatūrininkų g. 1, Kaunas.
📩 Taip pat galite siųsti mums užklausą į kurią atsakysime per 24 val.

Nemokamas pristatymas Lietuvoje nuo 100 €

Lietuvoje Venipak kurjeriu pristatymas per 1-2 darbo dienas.
Pristatymas už Lietuvos ribų per 4-10 darbo dienų.

Atsiimkite prekes parduotuvėje už 0 €

Armatūrininkų g. 1, Kaunas
Darbo laikas: I-V 9:00-18:00

RB3000, yra Rega gamintojo Tonearmas sukurtas su mažiausiu galimu mechaninių sujungimų kiekiu siekiant išgauti maksimaliai geriausią našumą. Kokybiškas skambesys garantuotas!

  • Efektyvus prispaudimo svoris: Low / 11 g.
  • Efektyvus ilgis: 236.5 mm.
  • Montavimo atstumas: 222 mm.

 

 


The RB3000 tonearm is packed with new features pushing the boundaries of tonearm design. As with all Rega tonearms, each one is meticulously hand-built by a team of highly skilled technicians. The R3000 uses improved bearings with each one being hand selected to be an interference fit with the paired spindle matching both the inside and outside diameters. This is a Rega developed method of increasing the amount of detail retrieved from the record surface, designed specifically to maximise performance of the tonearm and cartridge (cartridge sold separately).

Advanced design, precision engineering

The entire tonearm structure is designed to have the minimum of mechanical joints whilst using the stiffest materials in all critical areas. The tolerance of the RB3000 tonearm is so tight that no adhesive is used at any point throughout the construction. A brand new, low mass, precision engineered, vertical bearing assembly has been manufactured to further complement the inherent design philosophy of the Planar 10 turntable.

The RB3000 uses the latest award-winning Rega arm tube. Each one which is meticulously hand polished (keeping mass to an absolute minimum) and has been completely redesigned to redistribute mass and further reduce stresses and resonances. This advanced design tube increases the stiffness and rigidity of the overall assembly whilst reducing stress on the bearings even further.

 

KEY FEATURES

  • Meticulously hand built
  • Hand selected bearings to be an interference fit with the paired spindle
  • Near frictionless movement horizontally and vertically
  • Designed for maximum performance

 

SPECIFIAKCIJOS

Effective mass

Low / 11 g

Mounting distance, platter center to arm hole center

​222 mm

Effective length

236.5 mm

Offset angle

​21.55o

Overhang

14.5 mm

 

INSTRUKCIJOS

User Manual (EN).

Atgal į viršų

RB3000, yra Rega gamintojo Tonearmas sukurtas su mažiausiu galimu mechaninių sujungimų kiekiu siekiant išgauti maksimaliai geriausią našumą. Kokybiškas skambesys garantuotas!

  • Efektyvus prispaudimo svoris: Low / 11 g.
  • Efektyvus ilgis: 236.5 mm.
  • Montavimo atstumas: 222 mm.

 

 


The RB3000 tonearm is packed with new features pushing the boundaries of tonearm design. As with all Rega tonearms, each one is meticulously hand-built by a team of highly skilled technicians. The R3000 uses improved bearings with each one being hand selected to be an interference fit with the paired spindle matching both the inside and outside diameters. This is a Rega developed method of increasing the amount of detail retrieved from the record surface, designed specifically to maximise performance of the tonearm and cartridge (cartridge sold separately).

Advanced design, precision engineering

The entire tonearm structure is designed to have the minimum of mechanical joints whilst using the stiffest materials in all critical areas. The tolerance of the RB3000 tonearm is so tight that no adhesive is used at any point throughout the construction. A brand new, low mass, precision engineered, vertical bearing assembly has been manufactured to further complement the inherent design philosophy of the Planar 10 turntable.

The RB3000 uses the latest award-winning Rega arm tube. Each one which is meticulously hand polished (keeping mass to an absolute minimum) and has been completely redesigned to redistribute mass and further reduce stresses and resonances. This advanced design tube increases the stiffness and rigidity of the overall assembly whilst reducing stress on the bearings even further.

 

KEY FEATURES

  • Meticulously hand built
  • Hand selected bearings to be an interference fit with the paired spindle
  • Near frictionless movement horizontally and vertically
  • Designed for maximum performance

 

SPECIFIAKCIJOS

Effective mass

Low / 11 g

Mounting distance, platter center to arm hole center

​222 mm

Effective length

236.5 mm

Offset angle

​21.55o

Overhang

14.5 mm

 

INSTRUKCIJOS

User Manual (EN).