1 2
Audio-Technica

Audio-Technica AT-OC9XEB, cartridge

€250.95 EUR

▪️ Turite klausimų dėl šios prekės❓Galime pakonsultuoti telefonu +370 683 90000 arba atvykite į mūsų saloną Armatūrininkų g. 1, Kaunas.

Home delivery from €4.99

Venipak courier within 1-2 working days.

Collect in store €0

Armaturininkai str. 1, Kaunas
Working hours: IV 9:00-18:00

A new generation cartridge from the legendary OC9 series cartridge with double moving coil and cap.

  • Frequency band: 20 - 30,000 Hz.
  • Cantilever: Aluminum.
  • Channel separation: 25 dB (1 kHz).
  • DC Impedance: 12 ohms.

Since its introduction more than 30 years ago, Audio-Technica's pioneering moving coil OC9 cartridge series has been prized by demanding vinyl listeners and professional critics alike for its musical transparency, expression of sound and precise construction. An excellent affordable introduction to the characteristics that is moving coil.

  • Features bonded Elliptical stylus and aluminum cantilever
  • A neodymium magnet and pure iron yoke provide increased magnetic energy
  • Threaded inserts in the cartridge body enable the cartridge to be mounted on to the headshell or integral tonearm with just two screws – no nuts required
  • Aluminum body minimizes unwanted vibration for reduced resonance and a superior audio reproduction
  • Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve the purest signal possible

SPECIFICATIONS

Model AT-OC9XEB
Mounting 1/2” centers / Threaded inserts
Frequency Response 20 - 30,000 Hz
Body Material Aluminium
Channel Separation 25dB (1kHz)
Output Channel Balance 1.5dB (1kHz)
Output Voltage 0.32 mV (@ 1 kHz, 5 cm/sec)
Vertical Tracking Angle 20 degrees
Vertical Tracking Force Range 1.8 to 2.2 g (standard 2.0 g)
Stylus Shape Elliptical Bonded
Stylus Size 0.3 x 0.7 mil
Stylus Construction Bonded round shank
Cantilever Aluminum pipe
Coil Impedance 12 Ohms (1 kHz)
Coil Inductance 25 μH (1 kHz)
DC Resistance 12 Ohms
Static Compliance 20 x 10 - 6 cm / dyne
Dynamic Compliance 9 x 10 - 6 cm / dyne (100 Hz)
Terminal Pins Brass
Wire Used for Coil PCOCC (Copper by Ohno Continuous Casting process.)
Recommended Load Impedance Min 100 Ohms
Weight 7.6 g
Dimensions 17.3 (H) x 16.8 (W) x 25.7 (L) mm
Accessories Included 1 non-magnetic screw driver,
1 brush; 2 washers,
4 pairs of mounting screws: 5mm, 8mm, 10mm, 12mm
1 plastic protector

  • Live chat

    Expert opinion and advice

  • Delivery

    2-6 days, depends on country

  • Working hours

    On working days 9.00 - 18.00

  • Billing

    The most convenient ways
Back to top

A new generation cartridge from the legendary OC9 series cartridge with double moving coil and cap.

  • Frequency band: 20 - 30,000 Hz.
  • Cantilever: Aluminum.
  • Channel separation: 25 dB (1 kHz).
  • DC Impedance: 12 ohms.

Since its introduction more than 30 years ago, Audio-Technica's pioneering moving coil OC9 cartridge series has been prized by demanding vinyl listeners and professional critics alike for its musical transparency, expression of sound and precise construction. An excellent affordable introduction to the characteristics that is moving coil.

  • Features bonded Elliptical stylus and aluminum cantilever
  • A neodymium magnet and pure iron yoke provide increased magnetic energy
  • Threaded inserts in the cartridge body enable the cartridge to be mounted on to the headshell or integral tonearm with just two screws – no nuts required
  • Aluminum body minimizes unwanted vibration for reduced resonance and a superior audio reproduction
  • Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve the purest signal possible

SPECIFICATIONS

Model AT-OC9XEB
Mounting 1/2” centers / Threaded inserts
Frequency Response 20 - 30,000 Hz
Body Material Aluminium
Channel Separation 25dB (1kHz)
Output Channel Balance 1.5dB (1kHz)
Output Voltage 0.32 mV (@ 1 kHz, 5 cm/sec)
Vertical Tracking Angle 20 degrees
Vertical Tracking Force Range 1.8 to 2.2 g (standard 2.0 g)
Stylus Shape Elliptical Bonded
Stylus Size 0.3 x 0.7 mil
Stylus Construction Bonded round shank
Cantilever Aluminum pipe
Coil Impedance 12 Ohms (1 kHz)
Coil Inductance 25 μH (1 kHz)
DC Resistance 12 Ohms
Static Compliance 20 x 10 - 6 cm / dyne
Dynamic Compliance 9 x 10 - 6 cm / dyne (100 Hz)
Terminal Pins Brass
Wire Used for Coil PCOCC (Copper by Ohno Continuous Casting process.)
Recommended Load Impedance Min 100 Ohms
Weight 7.6 g
Dimensions 17.3 (H) x 16.8 (W) x 25.7 (L) mm
Accessories Included 1 non-magnetic screw driver,
1 brush; 2 washers,
4 pairs of mounting screws: 5mm, 8mm, 10mm, 12mm
1 plastic protector