1 3
Audio-Technica

Audio-Technica AT-OC9XEN, cartridge

€355.95 EUR

▪️ Turite klausimų dėl šios prekės❓Galime pakonsultuoti telefonu +370 683 90000 arba atvykite į mūsų saloną Armatūrininkų g. 1, Kaunas.

Home delivery from €4.99

Venipak courier within 1-2 working days.

Collect in store €0

Armaturininkai str. 1, Kaunas
Working hours: IV 9:00-18:00

A new generation cartridge from the legendary OC9 series cartridge with double moving coil and cap.

  • Frequency band: 20 - 30,000 Hz.
  • Cantilever: Aluminum.
  • Channel separation: 25 dB (1 kHz).
  • DC Impedance: 12 ohms.

Since its introduction more than 30 years ago, Audio-Technica's pioneering moving coil OC9 cartridge series has been prized by demanding vinyl listeners and professional critics alike for its musical transparency, expression of sound and precise construction. Featuring a square shank for accurate stylus alignment and nude diamond for increased fine detail retrieval.

  • Features low mass nude elliptical stylus and aluminum cantilever
  • A neodymium magnet and pure iron yoke provide increased magnetic energy
  • Threaded inserts in the cartridge body enable the cartridge to be mounted on to the headshell or integral tonearm with just two screws – no nuts required
  • Aluminum body minimizes unwanted vibration for reduced resonance and a superior audio reproduction
  • Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve the purest signal possible

        SPECIFICATIONS

        Model AT-OC9XEN
        Mounting 1/2” centers / Threaded inserts
        Frequency Response 20 - 30,000 Hz
        Body Material Aluminium
        Channel Separation 25dB (1kHz)
        Output Channel Balance 1.5dB (1kHz)
        Output Voltage 0.35 mV (@ 1 kHz, 5 cm/sec)
        Vertical Tracking Angle 20 degrees
        Vertical Tracking Force Range 1.8 to 2.2 g (standard 2.0 g)
        Stylus Shape Elliptical Nude
        Stylus Size 0.3 x 0.7 mil
        Stylus Construction Nude square shank
        Cantilever Aluminum pipe
        Coil Impedance 12 Ohms (1 kHz)
        Coil Inductance 25 μH (1 kHz)
        DC Resistance 12 Ohms
        Static Compliance 20 x 10 - 6 cm / dyne
        Dynamic Compliance 9 x 10 - 6 cm / dyne (100 Hz)
        Terminal Pins Brass
        Wire Used for Coil PCOCC (Copper by Ohno Continuous Casting process.)
        Recommended Load Impedance Min 100 Ohms
        Cartridge Weight 7.6 g
        Dimensions 17.3 (H) x 16.8 (W) x 25.7 (L) mm
        Accessories Included 1 non-magnetic screw driver
        1 brush
        2 washers
        4 pairs of mounting screws: 5mm, 8mm, 10mm, 12mm
        1 plastic protector

        • Live chat

          Expert opinion and advice

        • Delivery

          2-6 days, depends on country

        • Working hours

          On working days 9.00 - 18.00

        • Billing

          The most convenient ways
        Back to top

        A new generation cartridge from the legendary OC9 series cartridge with double moving coil and cap.

        • Frequency band: 20 - 30,000 Hz.
        • Cantilever: Aluminum.
        • Channel separation: 25 dB (1 kHz).
        • DC Impedance: 12 ohms.

        Since its introduction more than 30 years ago, Audio-Technica's pioneering moving coil OC9 cartridge series has been prized by demanding vinyl listeners and professional critics alike for its musical transparency, expression of sound and precise construction. Featuring a square shank for accurate stylus alignment and nude diamond for increased fine detail retrieval.

        • Features low mass nude elliptical stylus and aluminum cantilever
        • A neodymium magnet and pure iron yoke provide increased magnetic energy
        • Threaded inserts in the cartridge body enable the cartridge to be mounted on to the headshell or integral tonearm with just two screws – no nuts required
        • Aluminum body minimizes unwanted vibration for reduced resonance and a superior audio reproduction
        • Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve the purest signal possible

              SPECIFICATIONS

              Model AT-OC9XEN
              Mounting 1/2” centers / Threaded inserts
              Frequency Response 20 - 30,000 Hz
              Body Material Aluminium
              Channel Separation 25dB (1kHz)
              Output Channel Balance 1.5dB (1kHz)
              Output Voltage 0.35 mV (@ 1 kHz, 5 cm/sec)
              Vertical Tracking Angle 20 degrees
              Vertical Tracking Force Range 1.8 to 2.2 g (standard 2.0 g)
              Stylus Shape Elliptical Nude
              Stylus Size 0.3 x 0.7 mil
              Stylus Construction Nude square shank
              Cantilever Aluminum pipe
              Coil Impedance 12 Ohms (1 kHz)
              Coil Inductance 25 μH (1 kHz)
              DC Resistance 12 Ohms
              Static Compliance 20 x 10 - 6 cm / dyne
              Dynamic Compliance 9 x 10 - 6 cm / dyne (100 Hz)
              Terminal Pins Brass
              Wire Used for Coil PCOCC (Copper by Ohno Continuous Casting process.)
              Recommended Load Impedance Min 100 Ohms
              Cartridge Weight 7.6 g
              Dimensions 17.3 (H) x 16.8 (W) x 25.7 (L) mm
              Accessories Included 1 non-magnetic screw driver
              1 brush
              2 washers
              4 pairs of mounting screws: 5mm, 8mm, 10mm, 12mm
              1 plastic protector