Audio-Technica

Audio-Technica AT-VM95ML, cartridge

€177.45 EUR

▪️ Turite klausimų dėl šios prekės❓Galime pakonsultuoti telefonu +370 683 90000 arba atvykite į mūsų saloną Armatūrininkų g. 1, Kaunas.

Home delivery from €4.99

Venipak courier within 1-2 working days.

Collect in store €0

Armaturininkai str. 1, Kaunas
Working hours: IV 9:00-18:00

VM95 series micro linear stereo cartridge (with double magnet).

  • Frequency band: 20 - 25,000 Hz.
  • Cantilever: Aluminum.
  • Channel separation: 23 dB (1 kHz).
  • VM type cartridge.

This VM95 Series cartridge with 2.2 x 0.12 mil Microlinear stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.


    SPECIFICATIONS

    Frequency Response 20-25,000 Hz
    Channel Separation 23 (dB at 1 kHz)
    Vertical Tracking Angle 23°
    Stylus Construction Nude square shank
    Recommended Load Impedance 47,000 ohms
    Coil Impedance 3.3k ohms (1kHz)
    DC Resistance 485 ohms
    Coil Inductance 550 mH (1 kHz)
    Output Voltage 3.5 mV (1 kHz, 5 cm/sec.)
    Output Channel Balance 1.5dB (1kHz)
    Stylus Shape 2.2 x 0.12 mil Microlinear
    Cantilever Aluminum pipe
    Static Compliance 20 x 10 - 6 cm / dyne
    Dynamic Compliance 10 x 10 - 6 cm / dyne (100 Hz)
    Mounting Half-inch
    Cartridge Weight 6.1g
    Dimensions 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D
    Accessories Included Two 11 mm installation screws, two 8 mm installation screws, two washers, non-magnetic screwdriver
    Model AT-VM95ML
    Mounting Feature Half-inch mount
    Recommended Load Capacitance 100 to 200 pF
    Replacement Stylus AT-VMN95ML
    Stylus Size 2.2 x 0.12 mil
    Type VM Stereo Dual Magnet
    Weight 6.1 g (0.22 oz)
    Wire Used for Coil TP Copper



    • Live chat

      Expert opinion and advice

    • Delivery

      2-6 days, depends on country

    • Working hours

      On working days 9.00 - 18.00

    • Billing

      The most convenient ways
    Back to top

    VM95 series micro linear stereo cartridge (with double magnet).

    • Frequency band: 20 - 25,000 Hz.
    • Cantilever: Aluminum.
    • Channel separation: 23 dB (1 kHz).
    • VM type cartridge.

    This VM95 Series cartridge with 2.2 x 0.12 mil Microlinear stylus fits half-inch mount turntables. The cartridge offers excellent channel separation and low distortion for outstanding tonal quality. The durable, low-resonance housing includes threaded inserts that enable the cartridge to be mounted to the headshell with just two screws – no nuts required. And since all VM95 Series share the same body, the stylus can be replaced with any of the six interchangeable AT-VMN95 replacement styli.


      SPECIFICATIONS

      Frequency Response 20-25,000 Hz
      Channel Separation 23 (dB at 1 kHz)
      Vertical Tracking Angle 23°
      Stylus Construction Nude square shank
      Recommended Load Impedance 47,000 ohms
      Coil Impedance 3.3k ohms (1kHz)
      DC Resistance 485 ohms
      Coil Inductance 550 mH (1 kHz)
      Output Voltage 3.5 mV (1 kHz, 5 cm/sec.)
      Output Channel Balance 1.5dB (1kHz)
      Stylus Shape 2.2 x 0.12 mil Microlinear
      Cantilever Aluminum pipe
      Static Compliance 20 x 10 - 6 cm / dyne
      Dynamic Compliance 10 x 10 - 6 cm / dyne (100 Hz)
      Mounting Half-inch
      Cartridge Weight 6.1g
      Dimensions 17.2 mm (0.68") H × 18.9 mm (0.74") W × 28.3 mm (1.20") D
      Accessories Included Two 11 mm installation screws, two 8 mm installation screws, two washers, non-magnetic screwdriver
      Model AT-VM95ML
      Mounting Feature Half-inch mount
      Recommended Load Capacitance 100 to 200 pF
      Replacement Stylus AT-VMN95ML
      Stylus Size 2.2 x 0.12 mil
      Type VM Stereo Dual Magnet
      Weight 6.1 g (0.22 oz)
      Wire Used for Coil TP Copper