🎵Garso kolonėlės | 💎Žymūs gamintojai | 🔥Geros kainos | 🚚Pristatymas per 1-2 d.d. | ❄️Pasiruoškite sezonui jau dabar!
1 4
Audison

Audison AV Quattro, car audio amplifier

€910.00 EUR

Audison AV Quattro, car audio amplifier is backordered and will ship as soon as it is back in stock.

▪️ Turite klausimų dėl šios prekės❓Galime pakonsultuoti telefonu +370 683 90000, arba mūsų salone Armatūrininkų g. 1, Kaunas.
📩 Taip pat galite siųsti mums užklausą į kurią atsakysime per 24 val.

Home delivery from €4.99

Venipak courier within 1-2 working days.

Collect in store €0

Armaturininkai str. 1, Kaunas
Working hours: IV 9:00-18:00

AV quattro is a four-channel amplifier that can operate in four-, three- and two-channel modes.

  • Power: 4 x 120W @ 4Ω.
  • Distortion - THD (1kHz @ 4Ω): 0.04%.
  • Bandwidth: (-3 dB): 4 ÷ 60k Hz.

AV quattro is a four-channel amplifier which can work in four, three, two channel mode, delivering 1700 W (RMS) power total.
It is designed to handle complex configurations as front/rear and multi-channel systems. AMP (Amplifier Management Processor) constantly checks the operating status of the system and communicates with the user through 4 different colored LEDs, located on the top panel; ART (Automatic Remote Turn On-Off) allows automatic turn-on/off when a remote signal is not available from the source; up to 24 dB/Oct. slope crossovers allow to build front-rear, front-sub or multi-amplified systems while still ensuring a non-filtered output signal to expand the system.


Hi-Res audio

According to the definition of HiRes audio provided by JAS (Japan Audio Society - jas-audio.or.jp), Voce amplifiers exceed the above 40 kHz bandwidth analog requirement, providing an astonishing 4 ÷ 60k Hz (@ -3 dB, 2 VRMS , 4 Ω).

Specifications

SPECIFICATIONS

POWER SUPPLY

  • Power supply voltage: 11 ÷ 15 VDC
  • Idling current: 1.8 A
  • Idling current when off: 0.02 mA
  • Consumption @ 14.4 VDC (Max Musical Power): 55 A

AMPLIFIER STAGE

  • Distortion - THD (1kHz @ 4Ω): 0.04%
  • Bandwidth (-3 dB): 4 ÷ 60k Hz
  • S/N ratio (A weighted @ 1V): 100 dBA
  • Damping factor (1k Hz @ 4Ω): 100
  • Input sensitivity: 0.3 ÷ 5 V RMS
  • Input impedance: 15k Ω
  • Speaker-In sensitivity: 1.4 ÷ 24 V RMS
  • Speaker-In impedance: 5k Ω
  • Minimum load impedance: 2Ω
  • NOMINAL POWER (RMS) @ 12 VDC, THD 0.3%, 4Ω:
  • 100W
  • OUTPUT POWER (RMS) @ 14.4 VDC, THD 1%:
  • 4 Ch: 120 W x 4 (4Ω)
  • 4 Ch: 200 W x 4 (2Ω)
  • 4 Ch: 120 W x 2 (4Ω) + 200 W x 2 (2Ω)
  • 3 Ch: 120 W x 2 (4Ω) + 400 W x 1 (4Ω)
  • 3 Ch: 200 W x 2 (2Ω) + 400 W x 1 (4Ω)
  • 2 Ch: 400 W x 1 (4Ω) + 400 W x 1 (4Ω)

SIGNALS INPUTS / FILTERS

  • Inputs: Pre IN / Speakers IN
  • Outputs: Pre OUT Full Range
  • A Ch & B Ch Filters (Full / Hi-Pass / Lo-Pass):
  • 50 ÷ 50k Hz (2 range) @ 12 dB/Oct.
  • B Ch Filter (Lo-Pass 24 dB mono):
  • 50 ÷ 500 Hz @ 24 dB/Oct.

OTHER FUNCTIONS

  • Remote IN: 7 ÷ 15 VDC - 1mA
  • Remote OUT: 12 VDC - 50mA
  • Fuse (Strip type): 60 A
  • Remote SUB volume adj. (B Ch Lo-Pass 24 dB):
  • (-50 ÷ 6) dB
  • Speakers IN Turn-on (ART): Selectable

DIMENSIONS:

  • Max size (mm/inches): 220 x 470 x 58 / 8.66” x 18.50” x 2.28”

    INSTRUCTIONS

    User Manual (EN).

    Back to top

    AV quattro is a four-channel amplifier that can operate in four-, three- and two-channel modes.

    • Power: 4 x 120W @ 4Ω.
    • Distortion - THD (1kHz @ 4Ω): 0.04%.
    • Bandwidth: (-3 dB): 4 ÷ 60k Hz.

    AV quattro is a four-channel amplifier which can work in four, three, two channel mode, delivering 1700 W (RMS) power total.
    It is designed to handle complex configurations as front/rear and multi-channel systems. AMP (Amplifier Management Processor) constantly checks the operating status of the system and communicates with the user through 4 different colored LEDs, located on the top panel; ART (Automatic Remote Turn On-Off) allows automatic turn-on/off when a remote signal is not available from the source; up to 24 dB/Oct. slope crossovers allow to build front-rear, front-sub or multi-amplified systems while still ensuring a non-filtered output signal to expand the system.


    Hi-Res audio

    According to the definition of HiRes audio provided by JAS (Japan Audio Society - jas-audio.or.jp), Voce amplifiers exceed the above 40 kHz bandwidth analog requirement, providing an astonishing 4 ÷ 60k Hz (@ -3 dB, 2 VRMS , 4 Ω).

    Specifications

    SPECIFICATIONS

    POWER SUPPLY

    • Power supply voltage: 11 ÷ 15 VDC
    • Idling current: 1.8 A
    • Idling current when off: 0.02 mA
    • Consumption @ 14.4 VDC (Max Musical Power): 55 A

    AMPLIFIER STAGE

    • Distortion - THD (1kHz @ 4Ω): 0.04%
    • Bandwidth (-3 dB): 4 ÷ 60k Hz
    • S/N ratio (A weighted @ 1V): 100 dBA
    • Damping factor (1k Hz @ 4Ω): 100
    • Input sensitivity: 0.3 ÷ 5 V RMS
    • Input impedance: 15k Ω
    • Speaker-In sensitivity: 1.4 ÷ 24 V RMS
    • Speaker-In impedance: 5k Ω
    • Minimum load impedance: 2Ω
    • NOMINAL POWER (RMS) @ 12 VDC, THD 0.3%, 4Ω:
    • 100W
    • OUTPUT POWER (RMS) @ 14.4 VDC, THD 1%:
    • 4 Ch: 120 W x 4 (4Ω)
    • 4 Ch: 200 W x 4 (2Ω)
    • 4 Ch: 120 W x 2 (4Ω) + 200 W x 2 (2Ω)
    • 3 Ch: 120 W x 2 (4Ω) + 400 W x 1 (4Ω)
    • 3 Ch: 200 W x 2 (2Ω) + 400 W x 1 (4Ω)
    • 2 Ch: 400 W x 1 (4Ω) + 400 W x 1 (4Ω)

    SIGNALS INPUTS / FILTERS

    • Inputs: Pre IN / Speakers IN
    • Outputs: Pre OUT Full Range
    • A Ch & B Ch Filters (Full / Hi-Pass / Lo-Pass):
    • 50 ÷ 50k Hz (2 range) @ 12 dB/Oct.
    • B Ch Filter (Lo-Pass 24 dB mono):
    • 50 ÷ 500 Hz @ 24 dB/Oct.

    OTHER FUNCTIONS

    • Remote IN: 7 ÷ 15 VDC - 1mA
    • Remote OUT: 12 VDC - 50mA
    • Fuse (Strip type): 60 A
    • Remote SUB volume adj. (B Ch Lo-Pass 24 dB):
    • (-50 ÷ 6) dB
    • Speakers IN Turn-on (ART): Selectable

    DIMENSIONS:

    • Max size (mm/inches): 220 x 470 x 58 / 8.66” x 18.50” x 2.28”

      INSTRUCTIONS

      User Manual (EN).