🎵Garso kolonėlės | 💎Žymūs gamintojai | 🔥Geros kainos | 🚚Pristatymas per 1-2 d.d. | ❄️Pasiruoškite sezonui jau dabar!
NEBEGAMINAMA

Nano coating for convertibles 250ml

€9.50 EUR

▪️ Turite klausimų dėl šios prekės❓Galime pakonsultuoti telefonu +370 683 90000, arba mūsų salone Armatūrininkų g. 1, Kaunas.
📩 Taip pat galite siųsti mums užklausą į kurią atsakysime per 24 val.

Home delivery from €4.99

Venipak courier within 1-2 working days.

Collect in store €0

Armaturininkai str. 1, Kaunas
Working hours: IV 9:00-18:00

The liquid creates a water-resistant molecular coating to protect vinyl, tarpaulin car roofs. This coating also protects the coated material from dirt and grime, prevents them from being absorbed into the fabric, and also becomes waterproof, significantly reducing the accumulation of sediment on the roof surface.

  • The cabriolet roof is permanently protected from water, dirt and grease
  • Dirt accumulated on the roof is easily removed
  • The air permeability of the material remains unchanged
  • The nanocoating is resistant to temperature changes
  • The product does not contain any harmful chemicals - the product is ecological
  • Safe and easy to use product
  • Long-lasting protection of surfaces against water, dirt, grease
  • Harmless to human health
  • Nano coating yield: 80-120 ml/m2

The effectiveness lies in nanotechnology - since the product is a liquid substance, during coating it creates a microscopic layer around each fiber of the material, but does not change the material (feel to the touch, appearance, even the air permeability of the material remains the same). A properly formed molecular (nano) coating is resistant to water, salts, acid rain and dry cleaning. The composition does not contain any chemicals harmful to the environment or humans, so the product is harmless.

Convertible body vinyl, canvas roofs, tents, umbrellas, raincoats, etc.

One coating with nano coating remains effective for about 1.5 years. The durability of the coating directly depends on the harshness of the environment and the strength of the impact on the coated surface (e.g. it wears faster when driving at high speed, constantly experiencing physical friction. The efficiency is especially reduced by acid rain.)

When applying the roofing material, it must be dry, extremely clean, and 2 hours after application. after coating, the surface cannot get wet, the temperature must be higher than 5 degrees (+5°C). Do not apply on a wet surface or use the product at a temperature below 5 degrees Celsius (+5°C).

Back to top

The liquid creates a water-resistant molecular coating to protect vinyl, tarpaulin car roofs. This coating also protects the coated material from dirt and grime, prevents them from being absorbed into the fabric, and also becomes waterproof, significantly reducing the accumulation of sediment on the roof surface.

  • The cabriolet roof is permanently protected from water, dirt and grease
  • Dirt accumulated on the roof is easily removed
  • The air permeability of the material remains unchanged
  • The nanocoating is resistant to temperature changes
  • The product does not contain any harmful chemicals - the product is ecological
  • Safe and easy to use product
  • Long-lasting protection of surfaces against water, dirt, grease
  • Harmless to human health
  • Nano coating yield: 80-120 ml/m2

The effectiveness lies in nanotechnology - since the product is a liquid substance, during coating it creates a microscopic layer around each fiber of the material, but does not change the material (feel to the touch, appearance, even the air permeability of the material remains the same). A properly formed molecular (nano) coating is resistant to water, salts, acid rain and dry cleaning. The composition does not contain any chemicals harmful to the environment or humans, so the product is harmless.

Convertible body vinyl, canvas roofs, tents, umbrellas, raincoats, etc.

One coating with nano coating remains effective for about 1.5 years. The durability of the coating directly depends on the harshness of the environment and the strength of the impact on the coated surface (e.g. it wears faster when driving at high speed, constantly experiencing physical friction. The efficiency is especially reduced by acid rain.)

When applying the roofing material, it must be dry, extremely clean, and 2 hours after application. after coating, the surface cannot get wet, the temperature must be higher than 5 degrees (+5°C). Do not apply on a wet surface or use the product at a temperature below 5 degrees Celsius (+5°C).