Shure

Shure MVL, a microphone for smart devices

€60.00 EUR

Shure MVL, a microphone for smart devices is backordered and will ship as soon as it is back in stock.

▪️ Turite klausimų dėl šios prekės❓Galime pakonsultuoti telefonu +370 683 90000, arba mūsų salone Armatūrininkų g. 1, Kaunas.
📩 Taip pat galite siųsti mums užklausą į kurią atsakysime per 24 val.


Home delivery from €4.99

Venipak courier within 1-2 working days.

Collect in store €0

Armaturininkai str. 1, Kaunas
Working hours: IV 9:00-18:00

The MVL microphone is designed for use with a phone or tablet.

  • Frequency band: 40 Hz - 20,000 Hz .
  • Microphone capsule: MEMS.
  • SPL: 124dB SPL [2]
  • Sensitivity: -44.0 dBV at 1 kHz (Pa=94 dB SPL).

Where can the MOTIV MVL be used?

The MOTIV MVL is a lavalier microphone that can be slipped directly onto your lapel with the supplied tie clip. Its portability makes it ideal for on-location digital recording of closed mic speech, including interviews, videography, and public speaking.

How does it deliver better sound than mobile devices' integrated microphones?

The MOTIV MVL maintains audio purity via highly effective electromagnetic interference protection. The microphone also boasts low self-noise, high signal to noise ratio, low susceptibility to distortion, and high maximum SPL.

The included windscreen minimizes breath and wind noise. These factors combine to deliver a speech recording quality that far surpasses that of mobile devices' inbuilt microphones.

Which devices is the MOTIV MVL compatible with?

The MOTIV MVL can connect to any mobile device with a 3.5 mm input jack, and you can record with any software you like.

SPECIFICATIONS

Microphone Capsule

MEMS

Polar Pattern

Omnidirectional

Frequency Response

40 Hz to 20,000 Hz (see frequency response graph)

Output Impedance

350 Ω

Signal-To-Noise Ratio

65 dB

Maximum SPL

124dB SPL

Dynamic Range

95 dB typical

Sensitivity

-44.0 dBV at 1 kHz (Pa=94 dB SPL)

Equivalent Output Noise

29 dB A-weighted

Microphone Connector

3.5 mm (1/8") TRRS (Tip=No Connection, Ring1=No Connection, Ring2=Ground, Sleeve=Audio Output and Bias Voltage)

Microphone Bias

2.7 V DC through 2.2 K Ω resistor

Current Drain

245 µA, typical

Housing

Cast Zinc

Dimensions

15.2mm x 5.5mm x 132cm H x W x D

Cable Diameter

1.6 mm

Even Weight

with cable

8.0 g (0.282 oz.)

Microphone and Audio Input Connections for a Typical Device

 

Frequency Response

INSTRUCTIONS

User Manual (EN).

The MVL microphone is designed for use with a phone or tablet.

  • Frequency band: 40 Hz - 20,000 Hz .
  • Microphone capsule: MEMS.
  • SPL: 124dB SPL [2]
  • Sensitivity: -44.0 dBV at 1 kHz (Pa=94 dB SPL).

Where can the MOTIV MVL be used?

The MOTIV MVL is a lavalier microphone that can be slipped directly onto your lapel with the supplied tie clip. Its portability makes it ideal for on-location digital recording of closed mic speech, including interviews, videography, and public speaking.

How does it deliver better sound than mobile devices' integrated microphones?

The MOTIV MVL maintains audio purity via highly effective electromagnetic interference protection. The microphone also boasts low self-noise, high signal to noise ratio, low susceptibility to distortion, and high maximum SPL.

The included windscreen minimizes breath and wind noise. These factors combine to deliver a speech recording quality that far surpasses that of mobile devices' inbuilt microphones.

Which devices is the MOTIV MVL compatible with?

The MOTIV MVL can connect to any mobile device with a 3.5 mm input jack, and you can record with any software you like.

SPECIFICATIONS

Microphone Capsule

MEMS

Polar Pattern

Omnidirectional

Frequency Response

40 Hz to 20,000 Hz (see frequency response graph)

Output Impedance

350 Ω

Signal-To-Noise Ratio

65 dB

Maximum SPL

124dB SPL

Dynamic Range

95 dB typical

Sensitivity

-44.0 dBV at 1 kHz (Pa=94 dB SPL)

Equivalent Output Noise

29 dB A-weighted

Microphone Connector

3.5 mm (1/8") TRRS (Tip=No Connection, Ring1=No Connection, Ring2=Ground, Sleeve=Audio Output and Bias Voltage)

Microphone Bias

2.7 V DC through 2.2 K Ω resistor

Current Drain

245 µA, typical

Housing

Cast Zinc

Dimensions

15.2mm x 5.5mm x 132cm H x W x D

Cable Diameter

1.6 mm

Even Weight

with cable

8.0 g (0.282 oz.)

Microphone and Audio Input Connections for a Typical Device

 

Frequency Response

INSTRUCTIONS

User Manual (EN).