1 3
AMPIRE

AMPIRE BTR100X, Bluetooth receiver-receiver

€61.95 EUR

AMPIRE BTR100X, Bluetooth receiver-receiver is backordered and will ship as soon as it is back in stock.

▪️ Turite klausimų dėl šios prekės❓Galime pakonsultuoti telefonu +370 683 90000 arba atvykite į mūsų saloną Armatūrininkų g. 1, Kaunas.

Home delivery from €4.99

Venipak courier within 1-2 working days.

Collect in store €0

Armaturininkai str. 1, Kaunas
Working hours: IV 9:00-18:00

Listen to your favorite music in your car wirelessly with this receiver. Easy device pairing and device installation will allow you to enjoy the expanded functionality of the car without any worries.

  • Codec: Qualcomm®aptX Audio-Codec
  • Frequency band: 20Hz-20kHz.
  • RCA output (1.0V).
  • Certificate: Bluetooth 4.0 CSR8645
  • Auto start.

FEATURES
- Marine certified
- with auto turn on function (remote out)
- certified Bluetooth 4.0 CSR8645
- RCA output with 1.0V Signal output
- QDL licensed
- SSID Name: BTR100X
- aptX Audio Codec by Qualcomm®
- Bitrate: up to 345 kBit/s.

CONNECTIONS
- Blue: Remote out wire +12V/20mA
- Red: +12V ignition (ACC) Fuse 2A
- Black: GND
- RCA outputs: red= right, white= left

BLUETOOTH LICENSE
- Declaration ID D025151
- Referenced Qualified Design ID 56386
- Listing Date 08 December 2014

PAIRING
- Ensure that your streaming device has Bluetooth enabled.
- Turn the ignition (ACC) on.
- The LED (6) starts blinking (pairing mode).
- Select BTR100X in your device's Bluetooth setup menu.
- When successfully connected, the LED on the BTR100 will stop blinking and remain lit. A single beep will be heard through the connected sound system.

ATTENTION
- Multiple devices can be paired to the BTR100, but only one device can connect at one time.
- The BTR100 will remember the last device which was connected to it and reconnect with it automatically. If that device is not active, then other paired devices can connect manually, or new devices can be paired.
- When a connected device is out of range for more than one minute, the BTR100 will automatically disconnect it and returns to pairing mode [the LED (6) starts blinking].

OPERATING
- Once connected, audio is controlled from the streaming device. This includes volume and media selection.
- The BTR100 can be installed out of sight, as it has no user controls that need to be accessed.

SPECIFICATIONS

- Power: 12V DC
- Current consumption: 40mA max.
- Bluetooth 4.0
- Frequency range: 20Hz-20kHz
- Output level: 1V RMS

INSTRUCTIONS

User Manual (DE).

  • Live chat

    Expert opinion and advice

  • Delivery

    2-6 days, depends on country

  • Working hours

    On working days 9.00 - 18.00

  • Billing

    The most convenient ways
Back to top

Listen to your favorite music in your car wirelessly with this receiver. Easy device pairing and device installation will allow you to enjoy the expanded functionality of the car without any worries.

  • Codec: Qualcomm®aptX Audio-Codec
  • Frequency band: 20Hz-20kHz.
  • RCA output (1.0V).
  • Certificate: Bluetooth 4.0 CSR8645
  • Auto start.

FEATURES
- Marine certified
- with auto turn on function (remote out)
- certified Bluetooth 4.0 CSR8645
- RCA output with 1.0V Signal output
- QDL licensed
- SSID Name: BTR100X
- aptX Audio Codec by Qualcomm®
- Bitrate: up to 345 kBit/s.

CONNECTIONS
- Blue: Remote out wire +12V/20mA
- Red: +12V ignition (ACC) Fuse 2A
- Black: GND
- RCA outputs: red= right, white= left

BLUETOOTH LICENSE
- Declaration ID D025151
- Referenced Qualified Design ID 56386
- Listing Date 08 December 2014

PAIRING
- Ensure that your streaming device has Bluetooth enabled.
- Turn the ignition (ACC) on.
- The LED (6) starts blinking (pairing mode).
- Select BTR100X in your device's Bluetooth setup menu.
- When successfully connected, the LED on the BTR100 will stop blinking and remain lit. A single beep will be heard through the connected sound system.

ATTENTION
- Multiple devices can be paired to the BTR100, but only one device can connect at one time.
- The BTR100 will remember the last device which was connected to it and reconnect with it automatically. If that device is not active, then other paired devices can connect manually, or new devices can be paired.
- When a connected device is out of range for more than one minute, the BTR100 will automatically disconnect it and returns to pairing mode [the LED (6) starts blinking].

OPERATING
- Once connected, audio is controlled from the streaming device. This includes volume and media selection.
- The BTR100 can be installed out of sight, as it has no user controls that need to be accessed.

SPECIFICATIONS

- Power: 12V DC
- Current consumption: 40mA max.
- Bluetooth 4.0
- Frequency range: 20Hz-20kHz
- Output level: 1V RMS

INSTRUCTIONS

User Manual (DE).