1 2
Audio-Technica

Audio-Technica AT-OC9XSH, Shibata stereo cartridge

€649.00 EUR

▪️ Do you have questions about this product?❓We can consult by phone +370 683 90000 or come to our salon Armatūrinininkų St. 1, Kaunas.

Free delivery in Lithuania from € 100

In Lithuania, Venipak courier delivery is available via 1-2 business days.
Delivery outside Lithuania within 4-10 business days.

Pick up the goods in the store for € 0

Armatūrinininkų St. 1, Kaunas
Working hours: Thursday 9:00-18:00

A new generation cartridge from the legendary OC9 series Shibata cartridge with double moving spool and cap.

  • Frequency band: 20 - 47,000 Hz.
  • Cantilever: 0.28 mm Ø baron.
  • Channel separation: 27 dB (1 kHz).
  • DC Impedance: 12 ohms.

Since its introduction more than 30 years ago, Audio-Technica's pioneering moving coil OC9 cartridge series has been prized by demanding vinyl listeners and professional critics alike for its musical transparency, expression of sound and precise construction. Shibata profile diamond originally designed for Quadraphonic replay offers a depth of sound, combined with high frequency response that has to be heard to be believed.

  • Features nude Shibata stylus and boron cantilever with rich low frequency reproduction and high transient response
  • A neodymium magnet and permendur yoke provides dramatically increased magnetic energy
  • Threaded inserts in the cartridge body enable the cartridge to be mounted on to the headshell or integral tonearm with just two screws – no nuts required
  • Aluminum body minimizes unwanted vibration for reduced resonance and a superior audio reproduction
  • Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer

    SPECIFICATIONS

    Model AT-OC9XSH
    Mounting 1/2” centers / Threaded inserts
    Frequency Response 20 - 47,000 Hz
    Body Material Aluminium
    Channel Separation 27dB (1kHz)
    Output Channel Balance 1.0dB (1kHz)
    Output Voltage 0.4 mV (@ 1 kHz, 5 cm/sec)
    Vertical Tracking Angle 20 degrees
    Vertical Tracking Force Range 1.8 to 2.2 g (standard 2.0 g)
    Stylus Shape Shibata
    Stylus Size 2.7 x 0.26 mil
    Stylus Construction Nude square shank
    Cantilever 0.28 mm Ø nude boron
    Coil Impedance 12 Ohms (1 kHz)
    Coil Inductance 25 μH (1 kHz)
    DC Resistance 12 Ohms
    Static Compliance 20 x 10 - 6 cm / dyne
    Dynamic Compliance 16 x 10 - 6 cm / dyne (100 Hz)
    Terminal Pins Brass
    Wire Used for Coil PCOCC (Copper by Ohno Continuous Casting process.)
    Recommended Load Impedance Min 100 Ohms
    Cartridge Weight 7.6 g
    Dimensions 17.3 (H) x 16.8 (W) x 25.7 (L) mm
    Accessories Included 1 non-magnetic screw driver
    1 brush
    2 washers
    4 pairs of mounting screws: 5mm, 8mm, 10mm, 12mm
    1 plastic protector

    • Live chat

      Expert opinion and advice

    • Delivery

      2-6 days, depends on country

    • Working hours

      On working days 9.00 - 18.00

    • Billing

      The most convenient ways
    Back to top

    A new generation cartridge from the legendary OC9 series Shibata cartridge with double moving spool and cap.

    • Frequency band: 20 - 47,000 Hz.
    • Cantilever: 0.28 mm Ø baron.
    • Channel separation: 27 dB (1 kHz).
    • DC Impedance: 12 ohms.

    Since its introduction more than 30 years ago, Audio-Technica's pioneering moving coil OC9 cartridge series has been prized by demanding vinyl listeners and professional critics alike for its musical transparency, expression of sound and precise construction. Shibata profile diamond originally designed for Quadraphonic replay offers a depth of sound, combined with high frequency response that has to be heard to be believed.

    • Features nude Shibata stylus and boron cantilever with rich low frequency reproduction and high transient response
    • A neodymium magnet and permendur yoke provides dramatically increased magnetic energy
    • Threaded inserts in the cartridge body enable the cartridge to be mounted on to the headshell or integral tonearm with just two screws – no nuts required
    • Aluminum body minimizes unwanted vibration for reduced resonance and a superior audio reproduction
    • Pure Copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer

      SPECIFICATIONS

      Model AT-OC9XSH
      Mounting 1/2” centers / Threaded inserts
      Frequency Response 20 - 47,000 Hz
      Body Material Aluminium
      Channel Separation 27dB (1kHz)
      Output Channel Balance 1.0dB (1kHz)
      Output Voltage 0.4 mV (@ 1 kHz, 5 cm/sec)
      Vertical Tracking Angle 20 degrees
      Vertical Tracking Force Range 1.8 to 2.2 g (standard 2.0 g)
      Stylus Shape Shibata
      Stylus Size 2.7 x 0.26 mil
      Stylus Construction Nude square shank
      Cantilever 0.28 mm Ø nude boron
      Coil Impedance 12 Ohms (1 kHz)
      Coil Inductance 25 μH (1 kHz)
      DC Resistance 12 Ohms
      Static Compliance 20 x 10 - 6 cm / dyne
      Dynamic Compliance 16 x 10 - 6 cm / dyne (100 Hz)
      Terminal Pins Brass
      Wire Used for Coil PCOCC (Copper by Ohno Continuous Casting process.)
      Recommended Load Impedance Min 100 Ohms
      Cartridge Weight 7.6 g
      Dimensions 17.3 (H) x 16.8 (W) x 25.7 (L) mm
      Accessories Included 1 non-magnetic screw driver
      1 brush
      2 washers
      4 pairs of mounting screws: 5mm, 8mm, 10mm, 12mm
      1 plastic protector