Audio Technica

Audio Technica AT33Sa, turntable head

€838.95 EUR

Audio Technica AT33Sa, turntable head is backordered and will ship as soon as it is back in stock.

▪️ Turite klausimų dėl šios prekės❓Galime pakonsultuoti telefonu +370 683 90000 arba atvykite į mūsų saloną Armatūrininkų g. 1, Kaunas.

Home delivery from €4.99

Venipak courier within 1-2 working days.

Collect in store €0

Armaturininkai str. 1, Kaunas
Working hours: IV 9:00-18:00

The AT33Sa is Audio-Technica's first turntable head with a Shibata linear contact head, known for its excellent high frequency response and strong midrange and bass sound.

  • Frequency response 15 - 50,000 Hz
  • Channel separation 30 dB (1 kHz)
  • Vertical tracking angle 23°
  • Vertical tracking force 1.8-2.2g (standard 2.0g)

The AT33Sa is the first Audio-Technica moving coil cartridge to feature a Shibata line-contact stylus, known for its superior high-range performance and strong mid and bass sound. The stylus is mounted on a tapered boron cantilever with a double damper for reduced weight and better audio quality. The cartridge's dual moving coils provide excellent channel separation and are affixed within a strong but lightweight VC mold to greatly reduce unwanted vibration. The cartridge uses a neodymium magnet and a permendur yoke for dramatically enhanced magnetic energy. The PCOCC (Pure Copper by Ohno Continuous Casting) coils ensure pure audio transmission.

SPECIFICATIONS

Cartridge & Stylus
Frequency Response 15 - 50,000Hz
Channel Separation 30dB (1kHz)
Vertical Tracking Angle 23°
Vertical Tracking Force 1.8 to 2.2 g (standard 2.0 g)
Stylus Construction Nude square shank
Recommended Load Impedance Min 100Ω
Coil Impedance 10Ω (1kHz)
DC Resistance 10Ω
Coil Inductance 22µm (1kHz)
Output Voltage 0.4mV (1kHz and 5cm/sec.)
Output Channel Balance 0.5dB (1kHz)
Stylus Shape Shibata
Cantilever Nude tapered boron
Static Compliance 40×10-6cm/dyne
Dynamic Compliance 10×10-6cm/dyne (100Hz)
Mounting 1/2” centers
Dimensions H16×W16.6×D26.5mm
Accessories Included 1 non-magnetic screw driver; 1 brush; 2 washers; 2 Nuts; 2 x 19 mm mounting screws; 1 plastic protector; 1 set of PCOCC Lead Wires (AT6101)
Body Material Aluminium/Synthetic Resin
Stylus Curvature Radius Shibata
Type Dual Moving Coil
Weight 6.9g

  • Live chat

    Expert opinion and advice

  • Delivery

    2-6 days, depends on country

  • Working hours

    On working days 9.00 - 18.00

  • Billing

    The most convenient ways
Back to top

The AT33Sa is Audio-Technica's first turntable head with a Shibata linear contact head, known for its excellent high frequency response and strong midrange and bass sound.

  • Frequency response 15 - 50,000 Hz
  • Channel separation 30 dB (1 kHz)
  • Vertical tracking angle 23°
  • Vertical tracking force 1.8-2.2g (standard 2.0g)

The AT33Sa is the first Audio-Technica moving coil cartridge to feature a Shibata line-contact stylus, known for its superior high-range performance and strong mid and bass sound. The stylus is mounted on a tapered boron cantilever with a double damper for reduced weight and better audio quality. The cartridge's dual moving coils provide excellent channel separation and are affixed within a strong but lightweight VC mold to greatly reduce unwanted vibration. The cartridge uses a neodymium magnet and a permendur yoke for dramatically enhanced magnetic energy. The PCOCC (Pure Copper by Ohno Continuous Casting) coils ensure pure audio transmission.

SPECIFICATIONS

Cartridge & Stylus
Frequency Response 15 - 50,000Hz
Channel Separation 30dB (1kHz)
Vertical Tracking Angle 23°
Vertical Tracking Force 1.8 to 2.2 g (standard 2.0 g)
Stylus Construction Nude square shank
Recommended Load Impedance Min 100Ω
Coil Impedance 10Ω (1kHz)
DC Resistance 10Ω
Coil Inductance 22µm (1kHz)
Output Voltage 0.4mV (1kHz and 5cm/sec.)
Output Channel Balance 0.5dB (1kHz)
Stylus Shape Shibata
Cantilever Nude tapered boron
Static Compliance 40×10-6cm/dyne
Dynamic Compliance 10×10-6cm/dyne (100Hz)
Mounting 1/2” centers
Dimensions H16×W16.6×D26.5mm
Accessories Included 1 non-magnetic screw driver; 1 brush; 2 washers; 2 Nuts; 2 x 19 mm mounting screws; 1 plastic protector; 1 set of PCOCC Lead Wires (AT6101)
Body Material Aluminium/Synthetic Resin
Stylus Curvature Radius Shibata
Type Dual Moving Coil
Weight 6.9g