1 4
Audison

Audison AV Uno, car audio amplifier

€1,080.00 EUR

Audison AV Uno, car audio amplifier is backordered and will ship as soon as it is back in stock.

▪️ Turite klausimų dėl šios prekės❓Galime pakonsultuoti telefonu +370 683 90000 arba atvykite į mūsų saloną Armatūrininkų g. 1, Kaunas.

Home delivery from €4.99

Venipak courier within 1-2 working days.

Collect in store €0

Armaturininkai str. 1, Kaunas
Working hours: IV 9:00-18:00

"AV uno" is an amplifier with an innovative scheme called POD (Power On Demand); it provides dynamic power to the Class AB final stage, which serves as a follower to the amplified signal to increase efficiency and reduce temperature.

  • Power: 700W @ 4Ω.
  • Class AB amplifier.
  • Distortion - THD (1kHz @ 4Ω): 0.04%.
  • Installed: AMP (Amplifier Management Processor).
  • ART (Automatic Remote Turn On-Off) function.

AV uno is an amplifier featuring an innovative circuitry called POD (Power On Demand); it provides at the final stage in AB class a dynamic power that serves as a tracker to the signal to be amplified so as to increase efficiency and reduce the temperature. AV uno allows to combine the plus points, in terms of audio quality and robustness, of the AB Class traditional amplifiers with the efficiency of the D Class amplifiers. AMP (Amplifier Management Processor) constantly checks the operating status of the system and communicates with the user through 4 different colored LEDs, located on the top panel; ART (Automatic Remote Turn On-Off) allows automatic turn-on/off when a remote signal is not available from the source. AV uno is a mono amplifier designed to drive the subwoofer but also suitable for high power Dual Mono systems.

Specifications

SPECIFICATIONS

POWER SUPPLY
  • Power supply voltage: 11 ÷ 15 VDC
  • Idling current: 2.0 A
  • Idling current when off: 0.02 mA
  • Consumption @ 14.4 VDC (Max Musical Power): 120 A
AMPLIFIER STAGE
  • Distortion - THD (1kHz @ 4Ω): 0.04%
  • Bandwidth (-3 dB): 7 ÷ 20k Hz
  • S/N ratio (A weighted @ 1V): 95 dBA
  • Damping factor (1k Hz @ 4Ω): 160
  • Input sensitivity: 0.3 ÷ 5 V RMS
  • Input impedance: 15k Ω
  • Speaker-In sensitivity: 1.4 ÷ 24 V RMS
  • Speaker-In impedance: 5k Ω
  • Minimum load impedance: 1Ω
  • NOMINAL POWER (RMS) @ 12 VDC, THD 0.3%, 4Ω:
  • 700W x 1
  • OUTPUT POWER (RMS) @ 14.4 VDC,THD 1%: 1 Ch: 700 W x 1(4Ω) | 1 Ch: 1300 W x 1(2Ω) | 1 Ch: 1700 W x 1(1Ω)
SIGNALS INPUTS / FILTERS
  • Inputs: Pre IN / Speakers IN
  • Outputs: Hi-Pass Pre OUT (50 ÷ 150 Hz)
  • Filters (Full/Lo-Pass): 50 ÷ 150 Hz @ 24dB/Oct.
  • Speakers polarity: Normal / Inverted
  • Bass boost (Freq./Gain): 50-70-90 Hz / 0 ÷ 6 dB
  • Subsonic (Cont. adj.) Off ÷ 50 Hz @ 24dB/Oct.
OTHER FUNCTIONS
  • Remote IN: 7 ÷ 15 VDC - 1mA
  • Remote OUT: 12 VDC - 50mA
  • Fuse (Strip type): 100 A
  • Remote SUB volume adj.: (-50 ÷ 6) dB
DIMENSIONS:
  • Max size (mm/inches): 220 x 470 x 58 / 8.66” x 18.50” x 2.28”

INSTRUCTIONS

User Manual (EN).

  • Live chat

    Expert opinion and advice

  • Delivery

    2-6 days, depends on country

  • Working hours

    On working days 9.00 - 18.00

  • Billing

    The most convenient ways
Back to top

"AV uno" is an amplifier with an innovative scheme called POD (Power On Demand); it provides dynamic power to the Class AB final stage, which serves as a follower to the amplified signal to increase efficiency and reduce temperature.

  • Power: 700W @ 4Ω.
  • Class AB amplifier.
  • Distortion - THD (1kHz @ 4Ω): 0.04%.
  • Installed: AMP (Amplifier Management Processor).
  • ART (Automatic Remote Turn On-Off) function.

AV uno is an amplifier featuring an innovative circuitry called POD (Power On Demand); it provides at the final stage in AB class a dynamic power that serves as a tracker to the signal to be amplified so as to increase efficiency and reduce the temperature. AV uno allows to combine the plus points, in terms of audio quality and robustness, of the AB Class traditional amplifiers with the efficiency of the D Class amplifiers. AMP (Amplifier Management Processor) constantly checks the operating status of the system and communicates with the user through 4 different colored LEDs, located on the top panel; ART (Automatic Remote Turn On-Off) allows automatic turn-on/off when a remote signal is not available from the source. AV uno is a mono amplifier designed to drive the subwoofer but also suitable for high power Dual Mono systems.

Specifications

SPECIFICATIONS

POWER SUPPLY
  • Power supply voltage: 11 ÷ 15 VDC
  • Idling current: 2.0 A
  • Idling current when off: 0.02 mA
  • Consumption @ 14.4 VDC (Max Musical Power): 120 A
AMPLIFIER STAGE
  • Distortion - THD (1kHz @ 4Ω): 0.04%
  • Bandwidth (-3 dB): 7 ÷ 20k Hz
  • S/N ratio (A weighted @ 1V): 95 dBA
  • Damping factor (1k Hz @ 4Ω): 160
  • Input sensitivity: 0.3 ÷ 5 V RMS
  • Input impedance: 15k Ω
  • Speaker-In sensitivity: 1.4 ÷ 24 V RMS
  • Speaker-In impedance: 5k Ω
  • Minimum load impedance: 1Ω
  • NOMINAL POWER (RMS) @ 12 VDC, THD 0.3%, 4Ω:
  • 700W x 1
  • OUTPUT POWER (RMS) @ 14.4 VDC,THD 1%: 1 Ch: 700 W x 1(4Ω) | 1 Ch: 1300 W x 1(2Ω) | 1 Ch: 1700 W x 1(1Ω)
SIGNALS INPUTS / FILTERS
  • Inputs: Pre IN / Speakers IN
  • Outputs: Hi-Pass Pre OUT (50 ÷ 150 Hz)
  • Filters (Full/Lo-Pass): 50 ÷ 150 Hz @ 24dB/Oct.
  • Speakers polarity: Normal / Inverted
  • Bass boost (Freq./Gain): 50-70-90 Hz / 0 ÷ 6 dB
  • Subsonic (Cont. adj.) Off ÷ 50 Hz @ 24dB/Oct.
OTHER FUNCTIONS
  • Remote IN: 7 ÷ 15 VDC - 1mA
  • Remote OUT: 12 VDC - 50mA
  • Fuse (Strip type): 100 A
  • Remote SUB volume adj.: (-50 ÷ 6) dB
DIMENSIONS:
  • Max size (mm/inches): 220 x 470 x 58 / 8.66” x 18.50” x 2.28”

INSTRUCTIONS

User Manual (EN).