1 2
Grado

Grado THE REFERENCE3 (MI), cartridge

€1,993.95 EUR

Grado THE REFERENCE3 (MI), cartridge is backordered and will ship as soon as it is back in stock.

▪️ Turite klausimų dėl šios prekės❓Galime pakonsultuoti telefonu +370 683 90000 arba atvykite į mūsų saloną Armatūrininkų g. 1, Kaunas.

Home delivery from €4.99

Venipak courier within 1-2 working days.

Collect in store €0

Armaturininkai str. 1, Kaunas
Working hours: IV 9:00-18:00

The Master3 and Reference3 models use five-piece OTL console technology, reducing the tip weight by a further 5% compared to the Platinum3 and Sonata3 models.

  • Type: Moving Iron (MI).
  • Reproducible frequency band: 10 - 60,000 Hz.
  • Two configurations of this head are available: low (1.0 mV) or high (4.0 mV) output level.
  • Channel separation (at 1 Khz): 30 dB.
  • Recommended pressing weight: 1.6 - 1.9 g.
  • Head weight: 10 g.


    The Master3 and Reference3 models use a five piece OTL cantilever technology achieving an additional 5% tip mass reduction over the Platinum3 and Sonata3 models. The coils are wound with ultra-high purity long crystal (UHPLC) oxygen free copper wire. The Master3 model is mounted with Grado's specially designed nude elliptical diamond, and the Reference3 model uses Grado's true ellipsoid design diamond. These cartridges are individually calibrated.

    SPECIFICATIONS

    • Body: Australian Jarrah Wood
    • Cantilever: Machined Boron / Diamond Tip
    • output:
      High 4.0mV @5 CMV (45)
      Low 1.0mV @5 CMV (45)
    • Inductance:
      High Output 55mH
      Low Output 6mH
    • Resistance:
      High Output 660 ohms
      Low Output 70 ohms
    • Input Load: 10k-47k ohms
    • Cartridge Weight: 10 grams
    • Tracking Force: 1.6-1.9 grams
    • Compliance 20μm/mN
    • Channel Separation: Average 30db - 10-30k Hz
    • Controlled Frequency Response: 10-60 KHz
    • Non-Sensitive to Capacitive Load
    • Builds: High Output, Low Output, Mono

    • Live chat

      Expert opinion and advice

    • Delivery

      2-6 days, depends on country

    • Working hours

      On working days 9.00 - 18.00

    • Billing

      The most convenient ways
    Back to top

    The Master3 and Reference3 models use five-piece OTL console technology, reducing the tip weight by a further 5% compared to the Platinum3 and Sonata3 models.

    • Type: Moving Iron (MI).
    • Reproducible frequency band: 10 - 60,000 Hz.
    • Two configurations of this head are available: low (1.0 mV) or high (4.0 mV) output level.
    • Channel separation (at 1 Khz): 30 dB.
    • Recommended pressing weight: 1.6 - 1.9 g.
    • Head weight: 10 g.


      The Master3 and Reference3 models use a five piece OTL cantilever technology achieving an additional 5% tip mass reduction over the Platinum3 and Sonata3 models. The coils are wound with ultra-high purity long crystal (UHPLC) oxygen free copper wire. The Master3 model is mounted with Grado's specially designed nude elliptical diamond, and the Reference3 model uses Grado's true ellipsoid design diamond. These cartridges are individually calibrated.

      SPECIFICATIONS

      • Body: Australian Jarrah Wood
      • Cantilever: Machined Boron / Diamond Tip
      • output:
        High 4.0mV @5 CMV (45)
        Low 1.0mV @5 CMV (45)
      • Inductance:
        High Output 55mH
        Low Output 6mH
      • Resistance:
        High Output 660 ohms
        Low Output 70 ohms
      • Input Load: 10k-47k ohms
      • Cartridge Weight: 10 grams
      • Tracking Force: 1.6-1.9 grams
      • Compliance 20μm/mN
      • Channel Separation: Average 30db - 10-30k Hz
      • Controlled Frequency Response: 10-60 KHz
      • Non-Sensitive to Capacitive Load
      • Builds: High Output, Low Output, Mono