Helix M SIX, car sound amplifier 6x100W

€366.45 EUR 471.45 €

Helix M SIX, car sound amplifier 6x100W is backordered and will ship as soon as it is back in stock.

Home delivery from €4.99

Venipak courier within 1-2 working days.

Collect in store €0

Armaturininkai str. 1, Kaunas
Working hours: IV 9:00-18:00

M SIX is probably the most versatile car amplifier on the market, with the help of which you will create your favorite perfect sound in your car.

  • D- Class amplifier.
  • START-STOP function.
  • SMD support.
  • RCA connector.
  • High-quality Hi input.

One for all – no matter if 3-way, 2-way or subwoofer application, the 6-channel amplifier M SIX will always be the right choice.
With generously 100 Watts RMS per channel into both 4 Ohms and 2 Ohms load this amp really gets your speaker cones going despite its super-compact dimensions. On the other hand, the M SIX stays totally cool thanks to its highly efficient Class D design topology. And even bridged configurations are possible, delivering up to 3 x 200 Watts RMS of clean and undistorted output power.
In addition, a comprehensive and stunningly practical feature set leaves nothing to be desired. And finally the perfect sound tuning is no big deal thanks to its integrated crossover with all its setup options.

Class-D RCA-Input Active crossover Start-Stop-Capability SMD Ultra compact dimensions

PROPERTIES

  • Small footprint Class D amplifier with high output power of 100 Watts RMS @ 4 and 2 Ohms load
  • Start-Stop capability down to 6V supply voltage
  • 6-channel low level input
  • Integrated, active crossover with highpass, lowpass, bandpass and subsonic
  • "Input mode" switch for channel E & F for flexible input signal routing
  • SMD (Surface Mounted Device) manufacturing technology combines minimum space requirements with maximum reliability
  • Exclusive, extremely compact and clean design with illuminated HELIX-logo and low heat dissipation thanks to extraordinary efficiency

Outstanding features?

Start-Stop capability
The switched power supply of the HELIX M SIX ensures operation even if the battery's voltage drops down to 6 Volts during engine cranking.

In the package?

1 x Amplifier HELIX M SIX
1 x Mounting material
1 x Instruction manual

SPECIFICATIONS

Output power RMS / max.
- @ 4 Ohms 6 x 100 / 200 Watts
- @ 2 Ohms 6 x 100 / 200 Watts
- @ 1 Ohm -
- bridged @ 4 Ohms 3 x 200 / 400 Watts
- bridged @ 2 Ohms -
Max. output power per channel* Up to 130 Watts RMS @ 2 Ohms
Amplifier technology Class D
Inputs 6 x RCA/Cinch
1 x Remote In
Input sensitivity RCA / Cinch 0.5 - 6 Volts
Input impedance RCA / RCA 20 kOhms
Input impedance high level -
Outputs 6 x Speaker output
Output voltage RCA / RCA -
Signal converter for digital input -
Frequency response 10 Hz - 30,000 Hz
Bass boost -
Highpass 15 Hz - 4,000 Hz adjustable
Lowpass 40 Hz - 4,000 Hz adjustable
Bandpass 15 Hz - 4,000 Hz adjustable
Subsonic / HPF
15 Hz - 4,000 Hz adjustable
Phase -
Slope high- / lowpass 12 dB/Oct.
Slope subsonic / lowpass -
Signal-to-noise ratio digital input -
Signal-to-noise ratio analog input 98 dB (A-weighted)
Distortion (THD) 0.05%
Damping factor 100
Operating voltage 10.5 - 16 Volts (max. 5 sec. down to 6 Volts)
Idle current 1.550mA
Fuse 2 x 35 A Maxi-fuse (APX)
Additional features Active, adjustable crossover, subsonic input mode switch channel E / F, subsonic, Start-Stop capability
Dimensions (H x W x D) 50 x 320 x 154 mm /
2.00 x 12.60 x 6.06”

User manual / User manual.

Helix M SIX, automobilinis garso stiprintuvas
Helix

Helix M SIX, car sound amplifier 6x100W

€366.45 EUR 471.45 €

M SIX is probably the most versatile car amplifier on the market, with the help of which you will create your favorite perfect sound in your car.

DESCRIPTION

One for all – no matter if 3-way, 2-way or subwoofer application, the 6-channel amplifier M SIX will always be the right choice.
With generously 100 Watts RMS per channel into both 4 Ohms and 2 Ohms load this amp really gets your speaker cones going despite its super-compact dimensions. On the other hand, the M SIX stays totally cool thanks to its highly efficient Class D design topology. And even bridged configurations are possible, delivering up to 3 x 200 Watts RMS of clean and undistorted output power.
In addition, a comprehensive and stunningly practical feature set leaves nothing to be desired. And finally the perfect sound tuning is no big deal thanks to its integrated crossover with all its setup options.

Class-D RCA-Input Active crossover Start-Stop-Capability SMD Ultra compact dimensions

PROPERTIES

Outstanding features?

Start-Stop capability
The switched power supply of the HELIX M SIX ensures operation even if the battery's voltage drops down to 6 Volts during engine cranking.

In the package?

1 x Amplifier HELIX M SIX
1 x Mounting material
1 x Instruction manual

TECHNICAL DATA

SPECIFICATIONS

Output power RMS / max.
- @ 4 Ohms 6 x 100 / 200 Watts
- @ 2 Ohms 6 x 100 / 200 Watts
- @ 1 Ohm -
- bridged @ 4 Ohms 3 x 200 / 400 Watts
- bridged @ 2 Ohms -
Max. output power per channel* Up to 130 Watts RMS @ 2 Ohms
Amplifier technology Class D
Inputs 6 x RCA/Cinch
1 x Remote In
Input sensitivity RCA / Cinch 0.5 - 6 Volts
Input impedance RCA / RCA 20 kOhms
Input impedance high level -
Outputs 6 x Speaker output
Output voltage RCA / RCA -
Signal converter for digital input -
Frequency response 10 Hz - 30,000 Hz
Bass boost -
Highpass 15 Hz - 4,000 Hz adjustable
Lowpass 40 Hz - 4,000 Hz adjustable
Bandpass 15 Hz - 4,000 Hz adjustable
Subsonic / HPF
15 Hz - 4,000 Hz adjustable
Phase -
Slope high- / lowpass 12 dB/Oct.
Slope subsonic / lowpass -
Signal-to-noise ratio digital input -
Signal-to-noise ratio analog input 98 dB (A-weighted)
Distortion (THD) 0.05%
Damping factor 100
Operating voltage 10.5 - 16 Volts (max. 5 sec. down to 6 Volts)
Idle current 1.550mA
Fuse 2 x 35 A Maxi-fuse (APX)
Additional features Active, adjustable crossover, subsonic input mode switch channel E / F, subsonic, Start-Stop capability
Dimensions (H x W x D) 50 x 320 x 154 mm /
2.00 x 12.60 x 6.06”

User manual / User manual.

View product

M SIX is probably the most versatile car amplifier on the market, with the help of which you will create your favorite perfect sound in your car.

  • D- Class amplifier.
  • START-STOP function.
  • SMD support.
  • RCA connector.
  • High-quality Hi input.

One for all – no matter if 3-way, 2-way or subwoofer application, the 6-channel amplifier M SIX will always be the right choice.
With generously 100 Watts RMS per channel into both 4 Ohms and 2 Ohms load this amp really gets your speaker cones going despite its super-compact dimensions. On the other hand, the M SIX stays totally cool thanks to its highly efficient Class D design topology. And even bridged configurations are possible, delivering up to 3 x 200 Watts RMS of clean and undistorted output power.
In addition, a comprehensive and stunningly practical feature set leaves nothing to be desired. And finally the perfect sound tuning is no big deal thanks to its integrated crossover with all its setup options.

Class-D RCA-Input Active crossover Start-Stop-Capability SMD Ultra compact dimensions

PROPERTIES

  • Small footprint Class D amplifier with high output power of 100 Watts RMS @ 4 and 2 Ohms load
  • Start-Stop capability down to 6V supply voltage
  • 6-channel low level input
  • Integrated, active crossover with highpass, lowpass, bandpass and subsonic
  • "Input mode" switch for channel E & F for flexible input signal routing
  • SMD (Surface Mounted Device) manufacturing technology combines minimum space requirements with maximum reliability
  • Exclusive, extremely compact and clean design with illuminated HELIX-logo and low heat dissipation thanks to extraordinary efficiency

Outstanding features?

Start-Stop capability
The switched power supply of the HELIX M SIX ensures operation even if the battery's voltage drops down to 6 Volts during engine cranking.

In the package?

1 x Amplifier HELIX M SIX
1 x Mounting material
1 x Instruction manual

SPECIFICATIONS

Output power RMS / max.
- @ 4 Ohms 6 x 100 / 200 Watts
- @ 2 Ohms 6 x 100 / 200 Watts
- @ 1 Ohm -
- bridged @ 4 Ohms 3 x 200 / 400 Watts
- bridged @ 2 Ohms -
Max. output power per channel* Up to 130 Watts RMS @ 2 Ohms
Amplifier technology Class D
Inputs 6 x RCA/Cinch
1 x Remote In
Input sensitivity RCA / Cinch 0.5 - 6 Volts
Input impedance RCA / RCA 20 kOhms
Input impedance high level -
Outputs 6 x Speaker output
Output voltage RCA / RCA -
Signal converter for digital input -
Frequency response 10 Hz - 30,000 Hz
Bass boost -
Highpass 15 Hz - 4,000 Hz adjustable
Lowpass 40 Hz - 4,000 Hz adjustable
Bandpass 15 Hz - 4,000 Hz adjustable
Subsonic / HPF
15 Hz - 4,000 Hz adjustable
Phase -
Slope high- / lowpass 12 dB/Oct.
Slope subsonic / lowpass -
Signal-to-noise ratio digital input -
Signal-to-noise ratio analog input 98 dB (A-weighted)
Distortion (THD) 0.05%
Damping factor 100
Operating voltage 10.5 - 16 Volts (max. 5 sec. down to 6 Volts)
Idle current 1.550mA
Fuse 2 x 35 A Maxi-fuse (APX)
Additional features Active, adjustable crossover, subsonic input mode switch channel E / F, subsonic, Start-Stop capability
Dimensions (H x W x D) 50 x 320 x 154 mm /
2.00 x 12.60 x 6.06”

User manual / User manual.