Smart water leakage sensor Fibaro Flood Sensor

This sensor is an element of the wireless home control system, which wirelessly warns about the potential danger of flooding and room temperature.

• Power supply: 12 - 24 VDC, or CR123A power cell
• Radio signal frequency: 868.4 MHz
• Control distance: up to 50m outdoors; up to 30m inside (depending on building materials)
• Size (diameter x height): 72 x 28 mm
• Power consumption (with external power supply): 0.4W
• Measured temperature range: from -20 to 100 °C

The Fibaro wireless water leak sensor is a universal temperature and water leak sensor compatible with the z-wave network. The device can be powered by batteries (CR123A) or a 12VDC power source. In the event of a flood hazard, the sensor can send a signal to all elements of the z-wave system and warn of the danger with an audible signal and an integrated LED. The signal can also be transmitted to the security system by opening the NC relay contact. The integrated accelerometer warns if the device is moved. The sensor is adapted to be on the floor, but can be mounted on other surfaces as well, by extending the flood sensor contacts to the floor with cables. The device is non-sinking - in case of a sudden flood, it can float on the surface of the water and fully perform its function. Communication between the user and the device takes place via a Wi-Fi network and the Internet through a central controller.

• Power consumption (with external power supply): 0.4W
• Maximum current of relay outputs: 25mA
• Maximum voltage of relay outputs: 40V (AC or DC)
• Operating temperature of the device (with power supply): 0 - 40°C
• Operating temperature of the device (with external power source): -20 - 70°C

User manual (EN)

Manufacturer's website