Monitor Audio C2M-CP, in-ceiling speaker

Monitor Audio C2M-CP - mid-sized two-way in-ceiling speaker from the Creator Series. Equipped with a 1" C-CAM tweeter with UD Waveguide II and a 7" RST II mid-woofer, providing clear sound and rich bass. A sealed back box improves sound quality and reduces leakage by up to 30 dB, ensuring consistent performance in a variety of wall constructions. Installation is facilitated by the Quik-Link connector and Tri-Grip II system. Cutout diameter - 212 mm. Square or high-quality grille options are available.

This medium-sized Tier 2 in-ceiling loudspeaker features an RST II mid-bass driver and C-CAM tweeter. Its fully sealed back box delivers consistency of performance, no matter where it is used. It has a cut out dimension of 212 mm and revolutionary patented Quik-Link speaker cable connector and Tri-Grip II for quick, simple, reliable and strong installation and fitting.

This medium-sized Tier 2 in-ceiling loudspeaker is designed to deliver pristine, engaging acoustics where high-performance sound is a key requirement. It is a two-way model featuring an RST II mid-bass driver and C-CAM tweeter. The performance benefit of having both within a single design means greatly improved clarity, wider dispersion into the listening environment, and clear lifelike high-fidelity sound – of the quality you'd expect from any Monitor Audio passive box loudspeaker.

As a Controlled Performance (CP) model, it is fitted with a fully-sealed back box that provides an ideal air load for the drivers, optimizing mid-range and bass performance while maintaining sonic consistency regardless of interior wall construction. These rigid, mineral filled enclosures reduce the sound from the back of the cabinet by around 30 dB. This range guarantees excellent audio quality and versatility, and offers superior sound isolation between rooms and floors.

It has a cut-out dimension of 212 mm and uses the patented Quik-Link speaker cable connecter, which revolutionises the ease and speed of speaker installation. Tri-Grip has also been developed for simple, reliable and strong fitment.

Optional square or premium grille can be used with this model.

Key Features
Ideal for installations where pristine acoustic performance is required.
Filled back box delivers consistent performance regardless of interior wall construction
Two-way design
1 x 1" (25 mm) C-CAM tweeter with UD Waveguide II for lifelike sound
1 x 7" (178 mm) RST II mid-bass driver for pristine mid-range and full bass
Patented Quik-Link speaker cable connector for quicker installation (UK patent application no. 2216966.8)
Tri-Grip II for easy and secure fitment

System Format
2-Way
Channels
1
Frequency Response, Installed (-6dB)
70Hz - 35kHz​
Nominal Impedance
8 ohms
Minimum Impedance (20Hz to 20kHz)
6.4 Ohms @ 15 kHz
Sensitivity (2.83Vrms@1m, Installed)
87 dB
Maximum Peak SPL* (single speaker @ 1m Z-Weighted)
116 dB
Continuous Power Handling (RMS into Nominal Impedance, Pink Noise with 6dB Crest Factor)
65W
Recommended Amplifier Power (RMS into 8 OHM, Music Signal)
35 – 130W
Drive Unit Complement
1 x 7" (178 mm) RST II mid-bass driver
1 x 1" (25 mm) C-CAM tweeter
Crossover Frequency
LF/HF: 2.5 kHz
Bass Alignment
Sealed
Mounting Depth
177.5 mm (663/64")
Cut-Out Hole Diameter
212mm (83/8")
External Dimensions (Including Grille (H x W x D))
242 x 242 x 181.5 mm (91/2 x 91/2 x 44/16”)
Weight (each)
2.6 kg (5 lb 11 oz)
Pre-Construction Bracket
CM-B
Cabinet Finish
Matte black & Orange​ & Bronze
Sold As
Single Unit
Corner Switch
On/Off
HF Switch
- /0/ +