Monitor Audio IWA-250, installation active bass sound amplifier

€635.25 EUR

Monitor Audio IWA-250, installation active bass sound amplifier is backordered and will ship as soon as it is back in stock.

Home delivery from €4.99

Venipak courier within 1-2 working days.

Collect in store €0

Armaturininkai str. 1, Kaunas
Working hours: IV 9:00-18:00

The installation active bass sound amplifier is designed to further enliven the sounds emitted by your built-in subwoofers.

  • Power: 250W.
  • D-class audio amplifier.
  • Resistance: 4 ohms.
  • A product with extremely high assembly quality.

Delivering up to 250 watts into 4 ohms, a single IWA-250 will power single or dual IWS-10 's to provide higher power levels for larger rooms or to meet customer demands.

Technology

  • Rigid, high quality steel case
  • Switch mode power supply
  • Class D power amplifier delivering up to 250 watts into 4 ohms (dual IWS-10 drivers)
  • High efficiency design resulting in cool running – low thermal output
  • DSP controlled with advanced limiters
  • <0.5watt standby power consumption (ErP certified)
  • DC short circuit protection, over-current and thermal protection

SPECIFICATIONS

System Format

Active sub-woofer amplifier

Lower Frequency Limit

25 Hz

Upper Frequency Limit

Variable 40 – 120 Hz @ 24 dB/Octave

Amplifier Output

250 W @ < 1% THD+N

Drive Unit Complement

4 - 8 ohms

Amplifier Classification

Class D amplifier with Switch mode power supply (SMPSU)

Cabinet Support

For use when using the dedicated back box

EQ

Music/ Movie/ Impact

Phase Control

0 & 180 degrees

Auto Sensing

Line Level > 3.5mV

Input Level Requirements

Standby after approximately 15 minutes if no signal is sensed

Input Impedance

> 20K ohms

Changes Input Voltage

AC 110 - 120 V ~ 50/60Hz AC 220 - 240 V ~ 50/60Hz (Factory Region Preset)

Dimensions (H x W x D)

43.7 x 432 x 263 mm (1 3/4 x 17 x 10 3/8 )

Connection

LFE in (Stereo RCA and Balanced), 12v Trigger in (3.5 mm mono mini-jack), left and right speaker output

Trigger Input

5 - 12v via 3.5 mm mono mini-jack socket

Power Consumption

Standby: < 0.5 W (ErP approved) Typical Idle: < 10 W Max Rated: 200 W

Weight (unpacked)

4 kg (8 lb 12 oz)

Sold As

Single Unit

INSTRUCTIONS

User Manual (EN).
Monitor Audio IWA-250, instaliacinis garso stiprintuvas
Monitor Audio

Monitor Audio IWA-250, installation active bass sound amplifier

€635.25 EUR

The installation active bass sound amplifier is designed to further enliven the sounds emitted by your built-in subwoofers.

DESCRIPTION

Delivering up to 250 watts into 4 ohms, a single IWA-250 will power single or dual IWS-10 's to provide higher power levels for larger rooms or to meet customer demands.

Technology

  • Rigid, high quality steel case
  • Switch mode power supply
  • Class D power amplifier delivering up to 250 watts into 4 ohms (dual IWS-10 drivers)
  • High efficiency design resulting in cool running – low thermal output
  • DSP controlled with advanced limiters
  • <0.5watt standby power consumption (ErP certified)
  • DC short circuit protection, over-current and thermal protection

TECHNICAL DATA

SPECIFICATIONS

System Format

Active sub-woofer amplifier

Lower Frequency Limit

25 Hz

Upper Frequency Limit

Variable 40 – 120 Hz @ 24 dB/Octave

Amplifier Output

250 W @ < 1% THD+N

Drive Unit Complement

4 - 8 ohms

Amplifier Classification

Class D amplifier with Switch mode power supply (SMPSU)

Cabinet Support

For use when using the dedicated back box

EQ

Music/ Movie/ Impact

Phase Control

0 & 180 degrees

Auto Sensing

Line Level > 3.5mV

Input Level Requirements

Standby after approximately 15 minutes if no signal is sensed

Input Impedance

> 20K ohms

Changes Input Voltage

AC 110 - 120 V ~ 50/60Hz AC 220 - 240 V ~ 50/60Hz (Factory Region Preset)

Dimensions (H x W x D)

43.7 x 432 x 263 mm (1 3/4 x 17 x 10 3/8 )

Connection

LFE in (Stereo RCA and Balanced), 12v Trigger in (3.5 mm mono mini-jack), left and right speaker output

Trigger Input

5 - 12v via 3.5 mm mono mini-jack socket

Power Consumption

Standby: < 0.5 W (ErP approved) Typical Idle: < 10 W Max Rated: 200 W

Weight (unpacked)

4 kg (8 lb 12 oz)

Sold As

Single Unit

DOCUMENTS

INSTRUCTIONS

User Manual (EN).
View product

The installation active bass sound amplifier is designed to further enliven the sounds emitted by your built-in subwoofers.

  • Power: 250W.
  • D-class audio amplifier.
  • Resistance: 4 ohms.
  • A product with extremely high assembly quality.

Delivering up to 250 watts into 4 ohms, a single IWA-250 will power single or dual IWS-10 's to provide higher power levels for larger rooms or to meet customer demands.

Technology

  • Rigid, high quality steel case
  • Switch mode power supply
  • Class D power amplifier delivering up to 250 watts into 4 ohms (dual IWS-10 drivers)
  • High efficiency design resulting in cool running – low thermal output
  • DSP controlled with advanced limiters
  • <0.5watt standby power consumption (ErP certified)
  • DC short circuit protection, over-current and thermal protection

SPECIFICATIONS

System Format

Active sub-woofer amplifier

Lower Frequency Limit

25 Hz

Upper Frequency Limit

Variable 40 – 120 Hz @ 24 dB/Octave

Amplifier Output

250 W @ < 1% THD+N

Drive Unit Complement

4 - 8 ohms

Amplifier Classification

Class D amplifier with Switch mode power supply (SMPSU)

Cabinet Support

For use when using the dedicated back box

EQ

Music/ Movie/ Impact

Phase Control

0 & 180 degrees

Auto Sensing

Line Level > 3.5mV

Input Level Requirements

Standby after approximately 15 minutes if no signal is sensed

Input Impedance

> 20K ohms

Changes Input Voltage

AC 110 - 120 V ~ 50/60Hz AC 220 - 240 V ~ 50/60Hz (Factory Region Preset)

Dimensions (H x W x D)

43.7 x 432 x 263 mm (1 3/4 x 17 x 10 3/8 )

Connection

LFE in (Stereo RCA and Balanced), 12v Trigger in (3.5 mm mono mini-jack), left and right speaker output

Trigger Input

5 - 12v via 3.5 mm mono mini-jack socket

Power Consumption

Standby: < 0.5 W (ErP approved) Typical Idle: < 10 W Max Rated: 200 W

Weight (unpacked)

4 kg (8 lb 12 oz)

Sold As

Single Unit

INSTRUCTIONS

User Manual (EN).