Rear parking system Steelmate PTS400V4 with V4 screen

PTS400MV4 - 4-sensor parking system for the rear of the car with display V4. 4 ultrasonic sensors are installed in the rear bumper. When the reverse gear is engaged, the sensors begin to measure and provide visual information on the screen and audio information with the help of beeps. On the screen you can see which side is closer to the obstacle. LCD screen - blue color, with extremely accurate readings - 0.01 m accuracy. Also, approaching an obstacle can be heard from increasingly frequent beeps. When the obstacle is very close, a continuous sound signal is heard. It is possible to choose a sound signal: standard (beeps) or voice. The screen can be mounted on a panel or on glass.

• Readings on one screen
• 4-sensor parking system
• full protection of the rear of the car
• Technology protected against false signals
• Adjustable volume
• When the ignition is switched on, the system automatically checks whether all sensors are working
• The obstacle detection distance of the rear sensors is 0.1m - 2.5m;
• Easy-to-disconnect sensors, waterproof connectors
• Suitable for all weather conditions (-40C +85C)

Sensors used: 14D-12 . Their advantages:

• A smaller gap between the sensor head and the bumper means less space for rainwater or snow to accumulate
• The spring has been replaced with silicone - resulting in less resonance with the metal bumper
• 14mm sensor base is more stable than 12mm
• It is more convenient to change the angle of the sensor cover

Why are sensors mounted on the inside of the bumper good?

• These sensors adapt to the thickness of the bumper - the image corresponds to the one obtained in the factory
• The initial angle of the sensor is 0 degrees. This means it is completely flat on the bumper surface

Painting of parking sensors

Sensors are standard:

• Black color;
• Black mats
• Silver color
• White color

We can customize other color. The sensors can be painted in the existing color of the car.